FL-001
Описание
Информация для заказа
| Model | FL-001 | |||
| Type | Standard (G3/4) | |||
| Measurement range | 100 to 2,000 mm 3.94" to 78.74" | |||
| Specific conductive capacity of measurable media | 2 or more*1 | |||
| Resolution | 1 mm 0.04"*2 | |||
| Linearity | ±3 mm ±0.12"*2 | |||
| Temperature characteristics | 0.1 mm/°C | |||
| Undetectable area | In the case of water | Top side | 25 mm 0.98" | |
| Bottom side | 10 mm 0.39"*3 | |||
| In the case of oil | Top side | 50 mm 1.97" | ||
| Bottom side | 30 mm 1.18"*3 | |||
| Judgment output response time | 0.4 s minimum | |||
| Probe horizontal torque | 6 N m | |||
| Tank pressure | -0.1 to +0.5 Mpa | |||
| Connection port | G3/4 | |||
| Control output | Judgment output/alarm output | NPN/PNP open collector (selectable), 30 VDC max., 50 mA max. for each Residual voltage: 2 V max. for NPN, 2.5 V max. for PNP, N.O./N.C. switchable | ||
| Analog output | 4 to 20 mA, maximum load resistance: 350 Ω (Response time: 0.1 s after comparator output determined [90 % response]) Ripple when target remains stationary (P-P) 2 % of F.S. max. | |||
| Analog output accuracy | Resolution | 1 mm 0.04" | ||
| Zero accuracy | ±0.1 mA (Zero point = 4 mA) | |||
| Full scale accuracy | ±0.2 mA (full scale = 20 mA) | |||
| Applicable cable | 8-pin M12 connector | |||
| Rating | Power voltage | 10 to 30 VDC, ripple (P-P) 10% included, Class 2 or LPS | ||
| Current consumption | 300 mA max. (at 10 V)/120 mA max. (at 30 V) (excluding load) | |||
| Environmental resistance | Enclosure rating | IP67 | ||
| Ambient temperature | -20 to +60 °C -4 to +140°F | |||
| Relative humidity | 35 to 85 % RH (No condensation) | |||
| Environmentalresistance | Operating medium temperature | -20 to +100 °C -4 to +212 °F | ||
| Environmental resistance | Vibration resistance | 10 to 55 Hz, 0.75 mm 0.03" double amplitude in X, Y and Z directions, 2 hours respectively | ||
| Shock resistance | 300 m/s2 in 6 directions, 3 times respectively | |||
| Material | Liquid end materials | Probe: SUS304 Housing bottom seal section: PTFE Packing: FKM (bottom of the shielded part) | ||
| Case | Metal section of the housing: SUS304, SUS303 Plastic section of the housing: PBT, PAR, NBR, HNBR, PET | |||
| Weight | 400 g | |||
| *1 These values were measured at the position of 100 mm 3.94" or less from the wall of a metal tank. Contact KEYENCE for the case of a plastic tank. *2 These values were measured under the following conditions. Medium: Water, Tank material: Metal, Linearity range: Between 6 cm 2.36" from the top and 1 cm 0.39" from the bottom, Average time: 4 s *3 For the sanitary/plastic types, the undetectaИли отправьте нам запрос наd varies depending on the length of the probe. | ||||
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |