FD-MZ50ATK
Описание
Информация для заказа
| Model | FD-MZ50ATK*1 | |||
| Type | Vertical | |||
| Shape | Built-in amplifier | |||
| Rated flow range | 0.7 - 13.0 G/min (2.5 - 50 L/min)*1 | |||
| Possible display range | 0.7 - 26.4 G/min (2.5 - 100 L/min)*2 | |||
| Possible ranges to set | 0 - 26.4 G/min (0 - 100 L/min) | |||
| Connection port | NPT3/4 (20 A) | |||
| Detectable fluids | Water or non-corrosive liquid | |||
| Conductivity of detection fluids | 5 µS/cm or higher | |||
| Detection fluid temperature | 0 to +85°C 32 to 185 °F (No freezing) | |||
| Pressure loss | Max. 1.45 PSI (0.01 MPa) | |||
| Display method | Dual row display with 4-digit, 7 segment LED, bar display (2 colors), output indicators, flow indicator | |||
| Display resolution | 0.1/1 (G/min, L/min) selectable | |||
| Repeatability | 0.5 s : ±5% of F.S., 1 s : ±3.5% of F.S., 2.5 s : ±2.5% of F.S., 5 s : ±1.6% of F.S., 10 s : ±1% of F.S., 30 s : ±0.8% of F.S., 60 s : ±0.6% of F.S.*3 | |||
| Hysteresis | Variable | |||
| Response time (chatter prevention feature) | 0.5 s/1 s/2.5 s/5 s/10 s/30 s/60 s variable | |||
| Accumulated flow unit | 0.1/1/10/100/1000 (G, L) selectable | |||
| Integration data storage cycle | Save to memory every 10 seconds | |||
| Memory backup | EEPROM (Data storage length : 10 years or longer, Data read/write frequency : 1 million times or more) | |||
| Analog output | 4-20 mA, max. load resistance 260 Ω Analog output range can be set to any value | |||
| Integration reset/bank switch input/flow zero function input | Input time : 20 ms or greater,Select either the accumulation output or the accumulation pulse by setting the mode | |||
| Power consumption (Current consumption) | Normal : 1700 mW (70 mA), Power save : 1000 mW (40 mA) | |||
| Rating | Power voltage | 24 VDC, Ripple (P-P) 10 % or less, Class 2 | ||
| Environmental resistance | Enclosure rating | IP65 | ||
| Pressure resistance | 290 PSI (2.0 MPa) | |||
| Applied pressure range | Max. 145 PSI (1.0 MPa) | |||
| Ambient temperature | 0 to +50 °C 32 to 122 °F (No freezing) | |||
| Relative humidity | 35 to 85 % RH (No condensation) | |||
| Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions | |||
| Material | Liquid end materials | Bore : SCS13, Measurement pipe : PPS, O ring : fluoro-rubber (FKM) | ||
| Other materials | Plastic case areas : PPS, Metal case areas : SUS430, Cable : PVC | |||
| Accessory | Instruction Manual, Connector cable (2.7 m 106.3") | |||
| Weight | Approx. 1,130 g | |||
| *1 The rated flow range indicates recommended operating range. *2 Can be used within the display range as well as within the rated flow range. *3 The repeatability is effective within the display range. Convert the F.S. (full scale) listed in the table according to the rated flow range. | ||||
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |