Продавец OOO "ФилФар Технолоджи" развивает свой бизнес на Deal.by 7 лет.
Знак PRO означает, что продавец пользуется одним из платных пакетов услуг Deal.by с расширенными функциональными возможностями.
Сравнить возможности действующих пакетов

OOO "ФилФар Технолоджи"

IV-H500CA

Под заказТолько оптом

Цену уточняйте

  • +375 показать номер +375(44)765-55-50
  • +375(29)690-11-55

Заказ только по телефону

ModelIV-H500CA
TypeStandard distance
Installed distance50 to 500 mm 1.97" to 19.69"
ViewInstalled distance 50 mm 1.97": 25 (H) × 18 (V) mm 0.98" (H) × 0.71" (V) to
installed distance 500 mm 19.69": 210 (H) × 157 (V) mm 8.27" (H) × 6.18" (V)
Image sensorType1/3 inch color CMOS
Pixel752 (H) x 480 (V) 29.61" (H) x 18.90" (V)
Focus adjustmentAuto*1
Exposure time1/10 to 1/50,000
LightsIlluminationWhite LED
Lighting methodPulse lighting/DC lighting is switchable
ToolsTypeShape Detection, Color Area*2, Area*3, Edge Pixels, Width/Height, Diameter, Edge Presence, Pitch, Position Adjustment, High Speed Position Adjustment (1-Axis/2-Axis Adjustment)
NumberDetection tools: 16 tools, position adjustment tool: 1 tool*4
Switch settings (programs)32 programs
Image historyNumbers100 images*5*6
ConditionNG only/All is selectable*6
Analysis informationOFF/Statistics/Histograms/Matching rate list is switchable
Statistics: Processing time (latest value, MAX, MIN, AVE), number of OKs, number of NGs, trigger numbers, trigger errors, judgment results list by tools
Histograms: Histogram, matching degree (latest value, MAX, MIN, AVE), numbers of OKs, numbers of NGs
Matching rate list: Judgment results list by tools, matching rate list by tools, judgment bar list by tools*7
Other functionsHDR, HighGain, Color filters*2, Digital zoom*3, Brightness correction, Tilt correction, White balance*2, Mask function, Color histogram, Test run, ToolAutoTune, Input monitor, Output test, Security settings, Simulator*8, Sensor date/time information addition, Scaling function, Failing sensor list, Failure hold
IndicatorsPWR/ERR, OUT, TRIG, STATUS, LINK/ACT
InputTypeNon-voltage input/voltage input is switchable
For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)
For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
Inputs6 inputs (IN1 to IN6)
FunctionIN1: External trigger, IN2 to IN6: Enable by assigning the optional functions
Assignable functions: Program switching, Clear error, External master image registration
OutputTypeOpen collector output NPN/PNP is switchable, N.O./N.C. is switchable
For open collector NPN output: Maximum rating 26.4 V 50 mA, remaining voltage 1.5 V or lower
For open collector PNP output: Maximum rating 26.4 V 50 mA, remaining voltage 2 V or lower
Outputs4 outputs (OUT1 to OUT4)
FunctionEnable by assigning the optional functions
Assignable functions: Total judge result, RUN, BUSY, Error, Position adjustment result, Judge result of each tool, Result of the logical operation of each tool
EthernetStandard100BASE-TX/10BASE-T*9
ConnectorM12 4pin connector*9
Network functionFTP client, EtherNet/IPTM, PROFINET
RatingPower voltage24 VDC ±10 % (including ripple)
Current consumption0.6 A or less
Environmental resistanceEnclosure ratingIP67*10
Ambient temperature0 to +50 °C 32 to 122 °F (No freezing)
Relative humidity35 to 85 % RH (No condensation)
Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions*11
Shock resistance500 m/s2, 3 times in each of 6 directions*11
MaterialMain unit case: Aluminium die-casting, Packing: NBR, Front cover: Acrylic, Mounting adapter: POM
WeightApprox. 270 g
*1 The focusing position can be automatically adjusted at the time of installation. Deactivated during the operation. Focusing position can be registered by program.
*2 Color type only
*3 Possible with both the Color type and monochrome type
*4 Tools can be installed by programs.
*5 When using the FTP client function: 70 pictures
*6 Saves to the memory in the sensor. The images saved in the sensor can be backed up to the USB memory installed to the intelligent monitor (IV-M30) or to the PC by the software for IV (IV-H1).
*7 This can be displayed on the intelligent monitor (IV-M30) or by software for IV (IV-H1).
*8 Simulator can be used with the IV software (IV-H1).
*9 This is for connection with the intelligent monitor (IV-M30) or software for IV (IV-H1).
*10 Except when polarized filter attachment (OP-87436/OP-87437) is mounted
*11 Except when IV-G dome attachment (IV-D10) is mounted

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Цену уточняйте
  • Подобные товары компании
Контакты
  • Телефон:
    +375(44)765-55-50
    +375(29)690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, Беларусь
  • Email:
    zapros@filfar.by
Карта