Продавец OOO "ФилФар Технолоджи" развивает свой бизнес на Deal.by 7 лет.
Знак PRO означает, что продавец пользуется одним из платных пакетов услуг Deal.by с расширенными функциональными возможностями.
Сравнить возможности действующих пакетов

OOO "ФилФар Технолоджи"

IG-010

Под заказТолько оптом

Цену уточняйте

  • +375 показать номер +375(44)765-55-50
  • +375(29)690-11-55

Заказ только по телефону

ModelIG-010
Operation principleCCD method
Light sourceWavelength660 nm (Visible light semiconductor laser)
FDAClass 1*1
IEC/JISClass 1
Mounting distance0 to 1000 mm 39.37"
Measurement range10 mm 0.39"
Sampling cycle980 µs (When the number of times for averaging is set to [hsp]: 490 µs)
Minimum detectable objectHigh sensitivity modeø0.1 mm ø0.003" (Setting distance: 100 mm 3.94")*2
Standard modeø0.2 mm ø0.007" (Setting distance: 40 mm 1.57" or less),
ø0.5 mm ø0.02" (Setting distance: 500 mm 19.68")*2
Repeatability5 µm 0.20 Mil (Setting distance: 100 mm 3.94")
10 µm 0.39 Mil (Setting distance: 500 mm 19.68")
80 µm 3.15 Mil (Setting distance: 1,000 mm 39.37")*3
Linearity±0.28 % of F.S. (±28 µm ±1.10 Mil)*4
Temperature characteristics±0.03 % of F.S./°C (±3 µm ±0.12 Mil/°C)*5
Operation indicatorTransmitterOptical axis alignment indicator: Green LED, Power indicator: Green LED
ReceiverOptical axis alignment indicator: Green LED, Position monitor: Dual bar LED (Red, Green)
Environmental resistanceEnclosure ratingIP67
Ambient lightIncandescent lamp: 5,000 lux, Sunlight: 5,000 lux*6
Ambient temperature-10 to +45 °C 14 to 113 °F (No freezing)
Relative humidity35 to 85 % RH (No condensation)
Vibration resistance10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z axis
MaterialCaseZinc die-cast (Lower case), PBT (Upper case), Polyarylate (PAR) (Display part), SUS304 (Metallic part)
Lens coverGlass
CablePVC
AccessoriesTransmitter × 1, Receiver × 1, Sensor head cables (2 m 6.56') × 2
WeightApprox. 380 g (including supplied items)
*1 The classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.
*2 When the measurement target object is measured at the center position of the setting distance. When the measurement mode is set to the glass edge mode, a glass edge of C0.1 mm 0.003" or more can be detected (Setting distance: 500 mm 19.69").
*3 When the light is shielded by half at the center position of the setting distance. Vibration width when the average number of times is set to 16 and sampling is performed for 30 seconds. (When the analog output is used, the margin of error of analog output is added.)
*4 When the setting distance is 100 mm 3.94" and light is shielded at 50 mm 1.96"position from the receiver. Margin of error to the ideal line.
*5 When the setting distance is 100 mm 3.94" and light is shielded by half at 50 mm 1.96" position from the receiver.
*6 Excluding when the average number of times is set to [hsp].

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Цену уточняйте
Контакты
  • Телефон:
    +375(44)765-55-50
    +375(29)690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, Беларусь
  • Email:
    zapros@filfar.by
Карта