|Type||2 m 6.56' cable type|
|Detecting distance||30 to 500 mm 1.18" to 19.69"|
|Min. spot diameter||Adjustable spot|
Approx. ø3.5 mm at 100 mm ø0.14" at 3.94"
Approx. ø9 mm at 250 mm ø0.35" at 9.84"
Approx. ø18 mm at 500 mm ø0.71" at 19.69"
|Response time||200 µs/1 ms/10 ms/100 ms/500 ms selectable *1|
|Light source||White LED|
|Mutual interference reduction function||Up to 2 units when alternate frequencies set|
|Timer||OFF/ON delay/OFF delay/One-shot|
|Power supply||Power voltage||10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS|
|Current consumption||65 mA or less (without load) at 24 VDC;|
120 mA or less (without load) at 12 VDC *2
|I/O||Control output||NPN open collector/PNP open collector selectable|
30 VDC or less, 50 mA or less, remaining voltage: 2 V or less
|External input||Tuning /Transmission OFF selectable|
Short circuit current: 1 mA or less for NPN/2 mA or less for PNP
For the applied voltage, see the wiring diagrams in the instruction manual.
For the input times, see the time charts in the instruction manual.
|Protection circuit||Protection against reverse power connection, power supply surge, output overcurrent, output surge, and reverse output connection|
|Environmental resistance||Enclosure rating||IP65/IP67 (IEC60529)|
|Ambient light||Incandescent lamp: 10,000 lux or less, Sunlight: 20,000 lux or less|
|Ambient temperature||-20 to +50 °C -4 to 122 °F (No freezing)|
|Relative humidity||35 to 85 % RH (No condensation)|
|Vibration resistance||10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions|
|Shock resistance||1,000 m/s2, 6 times in each of the X, Y, and Z directions|
|Material||Case: Zinc die cast (Nickel chrome plating),|
Indicator cover: PPSU, Buttons: PES
Lens cover and display: PMMA (scratch-resistant coating),
Cable bushing: PBT, Cable: PVC, Spot adjustment dial: Iron (triiron tetraoxide coated)
|Weight||Approx. 170 g (including cable)|
|*1 When alternate frequencies are set, the response time increases by approximately 20%.|
*2 195 mA or less (at 10 V, with load)
*3 IO-Link: Specification v.1.1/COM2 (38.4 kbps) is supported. The setup file can be downloaded from KEYENCE website (http://www.keyence.com).
If you are using the product in an environment in which you cannot download files over the Internet, contact your nearest KEYENCE office.
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000
8 (044) 555-8-000
8 (017) 255-8-000
Или отправьте нам запрос на e-mail: email@example.com