GT2-P12

*2 Value when the ambient temperature is 20 °C 68 °F.
*3 Value at center of measuring range. Please note that the measurement force changes depending on the installation state of the dust boots.
*4 When an M8 oil-resistant cable (GT2-CHP2M/CHP5M/CHP10M) is used for the sensor head cable.
*5 The contact is included with the sensor.
*6 Including the relay connector.

Model				GT2-P12*1
Detection system				Scale Shot System II, absolute (no tracking errors) type
Measuring range				12 mm 0.47"
Resolution				0.5 μm 0.02 Mil
Indicated accuracy				2 µm 0.08 Mil (p-p)*2
Measuring force	Downward mounting			1.0 N*3
	Side mounting			0.95 N*3
	Upward mounting			0.9 N*3
Sampling cycle				4 ms
Mechanical response				10 Hz*2
Operation indicator light				2-color LED (red, green)
Environmental resistance	Enclosure rating			IP67G (JIS)*4, IP67 (IEC), NEMA Type 13*4
	Ambient temperature			-10 to +55 °C 14 to 131 °F (No freezing)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
	Shock resistance			1,000 m/s2 (IEC60068-2-27)
Materials	Main body			Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT
	Dust boot			NBR
	Contact			SUS304, SUS440C*5
Sensor head cable				Optional (connect to relay connector)
Weight				Approx. 35 g (excluding cable)*6

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

	8 (029) 555-8-000
	8 (044) 555-8-000
	8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by