Pressure Transmitter PPC-M51
General specifications | |
---|---|
Construction type | sensor: ceramic sensor ceramic diaphragm |
Supply | |
Rated voltage | versions for safe area: 11.5 ... 45 V DC, 2-wire 11.5 ... 35 V DC, HART, 2-wire 9 ... 32 V DC, PROFIBUS PA version for hazardous area see safety information (SI) |
Input | |
Measured variable | absolute or relative pressure |
Measurement range | 0.1 ... 40 bar max. turn down: 100:1 |
Output | |
Output signal | 4 ... 20 mA , analog , 2-wire 4 ... 20 mA with superimposed digital communication protocol HART 6.0, 2-wire digital communication signal PROFIBUS PA (Profile 3.02) |
Communication | 4 ... 20 mA HART (standard) PROFIBUS PA (option) |
Directive conformity | |
Electromagnetic compatibility | |
Low voltage | |
Conformity | |
Degree of protection | IEC 60529:2001 |
Measurement accuracy | |
Accuracy | reference accuracy: ±0.15 % (standard), ±0.075 % (platinum) The reference accuracy comprises the non-linearity according to limit point setting, hysteresis and non-reproducibility acc. to IEC 60770. The data refer to the calibrated span. |
Long-term drift | up to ±0.1 % of upper range limit (URL)/year |
Operating conditions | |
Process conditions | |
Ambient conditions | |
Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) wИли отправьте нам запрос на (-4 ... 158 °F) |
Mechanical specifications | |
Degree of protection | IP66, NEMA 4X IP68, NEMA 6P (24 hours in water 1.83 m (6 ft) deep) IP69K (with separate housing and FEP cable) |
Connection | gland M20 thread M20, G1/2, NPT1/2 device plug M12 HAN7D Harting connector, angled valve connector acc. ISO 4400, cable 5 m |
Material | materials in contact with process : Al2O3 ceramic (ultrapure 99.9 %) housing: - die-cast aluminum with protective powder-coating on polyester base, housing F31 - stainless steel AISI 316L (1.4404), housing F15 measuring cell seal: Viton, EPDM, NBR, Kalrez |
Process connection | threads ISO 228: G1/2, G1, G1-1/2, G2 threads ANSI: NPT1/2, NPT1, NPT1-1/2, NPT2 hygienic process connections: Clamp, Varivent, DRD, DIN 11851, DIN 11864, NEUMO, APV, uni adapter flanges: EN 1092-1: DN 25 ... DN 80, ANSI 16.5: 1 ... 4 inch, JIS B2220 |
Data for application in connection with hazardous areas | |
EU-Type Examination Certificate | see instruction manuals (SI) |
Directive conformity | |
International approvals | |
FM approval | see instruction manuals (SI) |
CSA approval | see instruction manuals (SI) |
IECEx approval | see instruction manuals (SI) |
Certificates and approvals | |
Drinking water approval | NSF61 approval |
Overspill protection | see approval (ZE) |
Marine approval | German Lloyd (GL) |
Accessories | |
Designation | see technical information (TI) |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
- Цена: Цену уточняйте
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
День | Время работы |
---|---|
Понедельник | 09:00-17:00 |
Вторник | 09:00-17:00 |
Среда | 09:00-17:00 |
Четверг | 09:00-17:00 |
Пятница | 09:00-17:00 |
Суббота | Выходной |
Воскресенье | Выходной |