Digital Input LB1014A
Описание
Информация для заказа
Slots | |
---|---|
Occupied slots | 2 |
Supply | |
Connection | backplane bus |
Rated voltage | 12 V DC , only in connection with the power supplies LB9*** |
Power dissipation | 0.6 W |
Power consumption | 0.6 W |
Internal bus | |
Connection | backplane bus |
Interface | manufacturer-specific bus to standard com unit |
Input | |
Input resistance | 500 k? |
Digital input | |
Number of channels | 15 |
Connection | channel I: 9+, 8-; channel II: 10+, 8-; channel III: 11+, 8-; channel IV: 12+, 8-; channel V: 13+, 8-; channel VI: 14+, 8-; channel VII: 15+, 8-; channel VIII: 16+, 8-; channel IX: 1+, 8-; channel X: 2+, 8-; channel XI: 3+, 8-; channel XII: 4+, 8-; channel XIII: 5+, 8-; channel XIV: 6+, 8-; channel XV: 7+, 8- |
Digital signals (active) | AC 130 ... 230 V (250 V max.) in-phase |
Minimum pulse duration | 2 periods |
Indicators/settings | |
LED indication | LED green: supply LED red: communication fault |
Coding | optional mechanical coding via front socket |
Directive conformity | |
Electromagnetic compatibility | |
Conformity | |
Electromagnetic compatibility | NE 21 |
Degree of protection | IEC 60529 |
Environmental test | EN 60068-2-14 |
Shock resistance | EN 60068-2-27 |
Vibration resistance | EN 60068-2-6 |
Damaging gas | EN 60068-2-42 |
Relative humidity | EN 60068-2-56 |
Ambient conditions | |
Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
Relative humidity | 95 % non-condensing |
Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 |
Vibration resistance | frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance |
Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
Mechanical specifications | |
Degree of protection | IP20 when mounted on backplane |
Connection | removable front connector with screw flange (accessory) wiring connection via spring terminals (0.14...1.5mm2) or screw terminals (0.08...1.5mm2) |
Mass | approx. 130 g |
Dimensions | 32.5 x 100 x 102 mm (1.28 x 3.9 x 4 inch) |
International approvals | |
EAC approval | Russia: RU C-IT.MIII06.B.00129 |
Marine approval | |
General information | |
System information | The module has to be mounted in appropriate backplanes (LB9***) outside hazardous areas. Here, the corresponding conformity has to be observed. For use the module must be installed in an appropriate enclosure. |
Supplementary information | Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
По во
- Цена: Цену уточняйте
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
День | Время работы |
---|---|
Понедельник | 09:00-17:00 |
Вторник | 09:00-17:00 |
Среда | 09:00-17:00 |
Четверг | 09:00-17:00 |
Пятница | 09:00-17:00 |
Суббота | Выходной |
Воскресенье | Выходной |