Com Unit for MODBUS TCP LB8111A2*
Supply | |
---|---|
Connection | backplane bus |
Rated voltage | 5 V DC , only in connection with the power supplies LB9*** |
Power consumption | 2.5 W |
Fieldbus interface | |
Fieldbus type | MODBUS TCP |
Ethernet Interface | |
Connection type | RJ-45 , via backplane |
Transfer rate | 100 MBit/s |
Station connection | direcИли отправьте нам запрос наbs or switches |
Bus length | max. 100 m (CAT 7 cable) |
Addressing | IP address assigned via Ethernet |
Ethernet address | IP V4 address (ex works standard: 0.0.0.0, auto IP, DHCP) |
Number of channels per station | max. 80 analog, max. 184 digital |
Supported I/O modules | all LB remote I/O modules |
HART communication | via Ethernet or service bus |
Internal bus | |
Connection | backplane bus |
Redundancy | via backplane |
Service interface | |
Connection | 9-pole to RS 485 standard , Sub-D |
Indicators/settings | |
LED indicator | LED P: (power supply): On = operating, fast flash = cold start LED 1: (collective alarm): On = internal fault, flashing = no MODBUS TCP connection LED 2: (status fieldbus): On = Network link OK LED 3: (status service bus): flashing = service bus receive channel active LED 4: (operating mode): flashing 1 (1:1 ratio) = active, normal operation; flashing 2 (7:1 ratio) = active, simulation LED 5: (status fieldbus): flashing = MODBUS response channel active LED 6: (status service bus): flashing = service bus response channel active |
Directive conformity | |
Electromagnetic compatibility | |
Conformity | |
Degree of protection | IEC 60529 |
Ambient conditions | |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
Shock resistance | shock type I, shock duration 11 ms, shock amplitude 50 m/s2, number of shock directions 6, number of shocks per direction 100 |
Vibration resistance | frequency range 5 ... 500 Hz, amplitude 5 ... 13.2 Hz ± 1.5 mm, 13.2 ... 100 Hz 1g, sweep rate 1 octave/min, duration 10 sweeps 5 Hz - 100 Hz - 5 Hz |
Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
Mechanical specifications | |
Degree of protection | IP20 (module) , mounted on backplane |
Connection | via backplane |
Mass | approx. 150 g |
Dimensions | 32.5 x 100 x 102 mm (1.28 x 3.9 x 4 inch) |
Data for application in connection with hazardous areas | |
Statement of conformity | PF 08 CERT 1234 X |
Directive conformity | |
International approvals | |
UL approval | E106378 |
IECEx approval | BVS 09.0037X |
EAC approval | Russia: RU C-IT.MIII06.B.00129 |
Marine approval |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
- Цена: Цену уточняйте
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
День | Время работы |
---|---|
Понедельник | 09:00-17:00 |
Вторник | 09:00-17:00 |
Среда | 09:00-17:00 |
Четверг | 09:00-17:00 |
Пятница | 09:00-17:00 |
Суббота | Выходной |
Воскресенье | Выходной |