Solenoid Driver KCD2-SLD-EX1.1065
General specifications | |
---|---|
Signal type | Digital Output |
Functional safety related parameters | |
Safety Integrity Level (SIL) | SIL 3 |
Supply | |
Connection | terminals 5+, 6- loop powered Power Rail or terminals 9+, 10- bus powered |
Rated voltage | 19 ... 30 V DC |
Input current | 80 mA at 24 V |
Power dissipation | 1.3 W at 24 V |
Load | 150 ? |
Input | |
Connection side | control side |
Connection | terminals 5+, 6- |
Test pulse length | max. 2 ms from DO card |
Signal level | loop powered 1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 30 V DC (current limited at 5 mA) 0-signal: 0 ... 5 V DC |
Rated current | 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ? 36 mA (minimum load current DO card) |
Inrush current | < 200 mA , 10 ms loop powered |
Output | |
Connection side | field side |
Connection | terminals 1+, 2- |
Internal resistor | 80 ? |
Current | typ. 65 mA |
Voltage | typ. 10 V |
Current limit | 65 mA |
Open loop voltage | typ. 16.4 V |
Load | nominal 0.05 ... 18 k? |
Output II | fault signal |
Line fault detection | signal at short-circuit RB < 25 ?, lead breakage RB > 50 k? ; test current < 500 µA |
Galvanic isolation | |
Output/other circuits | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Output II/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 32 Veff |
Indicators/settings | |
Display elements | LEDs |
Control elements | DIP-switch |
Configuration | via DIP switches |
Labeling | space for labeling at the front |
Directive conformity | |
Electromagnetic compatibility | |
Conformity | |
Electromagnetic compatibility | NE 21:2012 , EN 61326-3-2:2008 For further information see system description. |
Degree of protection | IEC 60529:2013 |
Protection against electrical shock | EN 61010-1:2010 |
Ambient conditions | |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications | |
Degree of protection | IP20 |
Connection | screw terminals |
Mass | approx. 150 g |
Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas | |
EU-Type Examination Certificate | EXA 17 ATEX 0002 X |
Supply | |
Input |
- Цена: Цену уточняйте
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
День | Время работы |
---|---|
Понедельник | 09:00-17:00 |
Вторник | 09:00-17:00 |
Среда | 09:00-17:00 |
Четверг | 09:00-17:00 |
Пятница | 09:00-17:00 |
Суббота | Выходной |
Воскресенье | Выходной |