SMART Transmitter Power Supply KCD2-STC-Ex1.ES
Описание
Информация для заказа
Описание оборудования | |
|---|---|
| Input 4 mA ... 20 mA Output 4 mA ... 20 mA | |
General specifications | |
| Signal type | Analog input |
Functional safety related parameters | |
| Safety Integrity Level (SIL) | SIL 3 |
Supply | |
| Connection | Power Rail or terminals 9+, 10- |
| Rated voltage | 19 ... 30 V DC |
| Ripple | ? 10 % |
| Rated current | ? 50 mA |
| Power dissipation | ? 800 mW |
| Power consumption | ? 1.2 W |
Input | |
| Connection side | field side |
| Connection | terminals 1+, 2-; 3+, 4- |
| Input signal | 4 ... 20 mA , limited to approx. 27 mA reverse polarity protected |
| Line fault detection | downscaling ? 3 mA ; upscaling ? 22 mA |
| Voltage drop | approx. 5 V on terminals 3+, 4- |
| Available voltage | ? 15 V at 20 mA terminals 1+, 2- |
Output | |
| Connection side | control side |
| Connection | terminals 5-, 6+ |
| Load | 0 ... 300 ? (source mode) |
| Output signal | 4 ... 20 mAИли отправьте нам запрос на1 % internal shunt) 4 ... 20 mA (sink mode), operating voltage 16 ... 28 V |
| Ripple | 20 mV rms |
Fault indication output | |
| Output type | fault bus signal , open collector transistor |
Transfer characteristics | |
| Deviation | ? 10 mV incl. calibration, linearity, hysteresis and fluctuations of supply voltage (source mode 1 ... 5 V) |
| Frequency range | field side into the control side: bandwidth with 1 mApp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) |
| Settling time | ? 200 ms |
| Rise time/fall time | ? 20 ms |
Indicators/settings | |
| Display elements | LEDs |
| Control elements | DIP-switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
Directive conformity | |
| Electromagnetic compatibility | |
Conformity | |
| Electromagnetic compatibility | NE 21:2006 |
| Degree of protection | IEC 60529:2001 |
Ambient conditions | |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
Mechanical specifications | |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 100 g |
| Dimensions | 12.5 x 114 x 124 mm (0.5 x 4.5 x 4.9 inch) , housing type A2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas | |
Описание оборудования- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |