Termination Board HiCTB08-SCT-44C-SC-RA

Supply | |
|---|---|
| Connection | X20: terminals 3, 5 (+); 4, 6 (-) |
| Nominal voltage | 24 V DC , in consideration of rated voltage of used isolators |
| Voltage drop | 0.9 V , voltage drop across the series diode on the termination board must be considered |
| Ripple | ? 10 % |
| Fusing | 2 A , in each case for 8 modules |
| Power dissipation | ? 500 mW , without modules |
| Reverse polarity protection | yes |
Redundancy | |
| Supply | Redundancy available. The supply for the isolators is decoupled, monitored and fused. |
Fault indication output | |
| Connection | X20: terminals 1, 2 |
| Output type | volt-free contact |
| Contact loading | 30 V DC, 1 A |
Indicators/settings | |
| Display elements | LED PWR1 (termination board power supply), green LED LED PWR2 (termination board power supply), green LED LED FAULT (fault indication), red LED - LED lits: module failure - LED flashes: power supply failure |
Directive conformity | |
| Electromagnetic compatibility | |
Conformity | |
| Electromagnetic compatibility | NE 21:2017 For further information see system description. |
| Degree of protection | IEC 60529:2001 |
Ambient conditions | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications | |
| Degree of protection | IP20 |
| Connection | |
| Core cross-section | screw terminals: 0.25 ... 1.5 mm2 (24 ... 12 AWG) |
| Material | housing: polycarbonate, 10 % glass fiber reinforced |
| Mass | approx. 450 g |
| Dimensions | 108 x 200 x 163 mm (4.25 x 7.9 x 6.42 inch) , height including module assembly |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas | |
| EU-Type Examination Certificate | CESI 06 ATEX 022 |
| Non-hazardous area | |
| Certificate | DEMKO 18 ATEX 2116 X |
| Galvanic isolation | |
| Directive conformity | |
International approvals | |
| UL approval | |
| IECEx approval | |
Accessories | |
| Designation | optional accessories: - HART communication board HiATB01-HART-4X8-Y1 - HART multiplexer master HiDMux2700 - HART connection cable HiACA-UNI-FLK34-*M* - label carrier HiALC-Hi*TB-SET-1** |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
- Цена: Цену уточняйте
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |


Supply

