Solenoid Driver HiC2883
Описание
Информация для заказа
General specifications | |
|---|---|
| Signal type | Digital Output |
Functional safety related parameters | |
| Safety Integrity Level (SIL) | SIL 3 |
Supply | |
| Connection | SL1: 1a, 1b(-); 2a, 2b(+) |
| Rated voltage | 19 ... 30 V bus powered via Termination Board 19 ... 30 V loop powered via input , reverse polarity protected |
| Input current | 75 mA at 24V, 270? load |
| Power dissipation | 1.3 W at 24V, 270? load |
Input | |
| Connection side | control side |
| Connection | SL1: 7a(-), 9a(-); 8a(+), 10a(+) |
| Test pulse length | max. 2 ms from DO card |
| Signal level | loop powered 1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 30 V DC (current limited at 5 mA) 0-signal: 0 ... 5 V DC |
| Rated current | 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ? 36 mA (minimum load current DO card) |
| Inrush current | < 200 mA , 10 ms loop powered |
Output | |
| Connection side | field side |
| Connection | SL2: 5a(+), 5b(-) |
| Internal resistor | approx. 240 ? |
| Current | typ. 45 mA |
| Voltage | ? 12 V |
| Current limit | 50 mA |
| Open loop voltage | typ. 24.6 V |
| Load | nominal 0.05 ... 18 k? |
| Switching frequency | max. 10 Hz |
| Energized/De-energized delay | 20 ms / 5 ms |
| Line fault detection | signal at short-circuit RB < 25 ?, lead breakage RB > 50 k? ; test current < 500 µA |
Fault indication output | |
| Connection | SL1: 6b |
| Output type | open collector transistor (internal fault bus) |
Galvanic isolation | |
| Output/other circuits | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Indicators/settings | |
| Display elements | LEDs |
| Control elements | DIP-switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
Directive conformity | |
| Electromagnetic compatibility | |
Conformity | |
| Electromagnetic compatibility | NE 21:2012 , EN 61326-3-2:2008 For further information see system description. |
| Degree of protection | IEC 60529:2013 |
| Protection against electrical shock | EN 61010-1:2010 |
Ambient conditions | |
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) Observe the temperature range limited by derating, see section derating. |
Mechanical specifications | |
| Degree of protection | IP20 |
| Mass | approx. 150 g |
| Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| Mounting | on Termination Board |
| Coding | pin 1 and 4 trimmed For further information see system description. |
General specifications- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |