SMART Current/Voltage Converter HiD2012
General specifications | |
---|---|
Signal type | Analog input |
Supply | |
Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
Rated voltage | 20.4 ... 30 V DC bus powered via Termination Board |
Rated current | 25 mA at 24 V (per channel) |
Power dissipation | typ. 0.5 W (per channel) |
Input | |
Connection side | field side |
Connection | SL2: 5a(+), 5b(-); 1a(+), 1b(-) |
Input current | 0/4 ... 20 mA |
Current range | 0/4 ... 20 mA , with field selectable DC offset suppression |
Voltage range | 0/0.2 ... 1 V 0/1 ... 5 V 0/2 ... 10 V |
Impedance | current input: 50 ? (overcurrent protected) with field selectable 5 V level shift voltage input: 100 k?/Uin |
Output | |
Connection side | control side |
Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) |
Current range | 0/4 ... 20 mA , (source or sink mode) |
Voltage range | 0 ... 5 V/1 ... 5 V (on 250 ? internal shunt) 0 ... 10 V/2 ... 10 V (on 500 ? internal shunt) |
Ripple | max. 15 mV rms |
Operating range | 3 ... 30 V , sink mode |
Output compliance | 13 V (load 650 ? at 20 mA) , source mode |
Transfer characteristics | |
Accuracy | 0.1 % of full-scale value (current output) |
Influence of temperature | < ± 0.01 %/K of full-scale value |
Frequency range | communication channel: 0.5 ... 40 kHz within 3 db, (-6 db at 100 kHz),Или отправьте нам запрос на Tx, suitable for use with SMART transmitters using HART or similar protocol , not available with voltage input |
Linearity | < ± 0.1 % of full-scale value |
Indicators/settings | |
Display elements | LED |
Control elements | DIP-switch potentiometer |
Configuration | via DIP switches via potentiometer |
Labeling | space for labeling at the front |
Directive conformity | |
Electromagnetic compatibility | |
Conformity | |
Electromagnetic compatibility | NE 21:2006 For further information see system description. |
Degree of protection | IEC 60529 |
Ambient conditions | |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications | |
Degree of protection | IP20 |
Mass | approx. 140 g |
Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) |
Mounting | on Termination Board |
Data for application in connection with hazardous areas | |
EU-Type Examination Certificate | CESI 02 ATEX 086 |
Certificate | PF 11 CERT 2109 X , observe statement of conformity |
Directive conformity | |
International approvals | |
CSA approval |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
<img alt="" src=" http://</h3> |
- Цена: Цену уточняйте
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
День | Время работы |
---|---|
Понедельник | 09:00-17:00 |
Вторник | 09:00-17:00 |
Среда | 09:00-17:00 |
Четверг | 09:00-17:00 |
Пятница | 09:00-17:00 |
Суббота | Выходной |
Воскресенье | Выходной |