AS-Interface Safety Monitor VAS-2A-K12-S1
Описание
Информация для заказа
Описание оборудования | |
|---|---|
| Safety Monitor, 2 integrated safe outputs | |
General specifications | |
| AS-Interface specification | V2.1 |
| Switch-on delay | < 10 s |
| Response delay | < 50 ms |
Functional safety related parameters | |
| Safety Integrity Level (SIL) | SIL 3 |
| Performance level (PL) | PL e |
| MTTFd | 389 a |
| B10d | 2 E+5 |
Indicators/operating means | |
| LED green | Off: contacts of the safety output (OSSD) open constantly lit: contacts of the safety output (OSSD) closed flashing: delay time running for Stop Category 1 |
| LED yellow | off: - constantly lit: startup/restart lock active flashing: external test required |
| LED red | Off: contacts of the safety output (OSSD) closed constantly lit: contacts of the safety output (OSSD) open flashing: error |
| LED POWER | from: no power supply green, continuous illuminated: AS-Interface power supply available |
| LED AS-i | from: normal operation red, continuous illuminated: communication error |
Electrical specifications | |
| Rated operating voltage | 24 V DC ± 15 % Residual ripple ? 1Или отправьте нам запрос наom AS-Interface |
| Rated operating current | ? 200 mA ? 45mA from AS-Interface |
| Surge protection | overvoltage category III for rated operating voltage 300VDC acc. to VDE0110 Part1 |
Interface | |
| Interface type | RS 232, serial |
| Transfer rate | 9600 baud, no parity, 1 start bit, 1 stop bit, 8 data bits |
Input | |
| Number/Type | 2 opto-coupling inputs (high-active) "Start" and "protection control (EDM)", input currents about 10 mA at 24 V DC |
Output | |
| Safety output | 2 x 2 potential-free NO contacts, max. contact loading: 1 A DC-13 at 24 V DC, 3 A AC-15 at 230 V AC |
| Output type | Signal output: PNP transistor output, 200 mA, short-circuit and reverse-polarity-proof |
Directive conformity | |
| Electromagnetic compatibility | |
| Low voltage | |
| Machinery Directive | |
Standard conformity | |
| Degree of protection | EN60529:2000 |
| Electrical safety | EN 50178:1998 |
| AS-Interface | EN62026-2:2013 |
| Functional safety | ISO13849-1:2008 (up to category4/PLe), IEC61508:2000/IEC62061:2005 (up to SIL3) |
| Standards | NFPA 79:2002 |
Ambient conditions | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) |
Mechanical specifications | |
| Degree of protection | IP20 (only for use in electrical operating rooms / switch cabinet suitable with minimum protection type IP54) |
| Connection | screw terminals |
| Material | |
| Mass | 450 g |
| Mounting | DIN rail mounting |
Описание оборудования
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |