AS-Interface sensor/actuator module VBA-4E3A-G4-ZE/E2
Описание
Информация для заказа
Описание оборудования | |
|---|---|
| G4 module IP65 4 inputs (PNP) and 3electronic outputs | |
General specifications | |
| Slave type | A/B slave |
| AS-Interface specification | V3.0 |
| Required master specification | ? V2.1 |
| UL File Number | E223772 |
Indicators/operating means | |
| LED PWR/FAULT | dual LED green/red green: AS-Interface voltage red: communication error or address 0 green/red flashing: overload sensor supply or outputs |
| LED AUX | ext. auxiliary voltage UAUX ; LED green |
| LED IN | switching state (input); 4 LED yellow |
| LED OUT | Switching state (output); 3 LED yellow |
Electrical specifications | |
| Auxiliary voltage (output) | 24 V DC ± 15 % PELV |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Rated operating current | ? 40 mA (without sensors) / max. 240 mA |
| Protection class | III |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) |
Input | |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC |
| Supply | from AS-Interface |
| Voltage | 21 ... 31 V |
| Current loading capacity | ? 180 mA (TB ? 40 °C), ? 140 mA (TB ? 60 °C), short-circuit protected |
| Input current | ? 9 mA (limited internally) |
| Switching point | according to DIN EN 61131-2 (Type 2) |
Output | |
| Number/Type | 3 electronic outputs, PNP, overload and short-circuit proof |
| Supply | from external auxiliary voltage UAUX |
| Current | 4 A total OUT 1, OUT 2: 2A per output OUT 3: 1.5A |
| Voltage | ? (UAUX - 0.5 V) |
Directive conformity | |
| Electromagnetic compatibility | |
Standard conformity | |
| Degree of protection | EN60529:2000 |
| Fieldbus standard | EN62026-2:2013 |
| Input | EN 61131-2:2007 |
| Emitted interference | EN61000-6-4:2007 |
| AS-Interface | EN62026-2:2013 |
| Noise immunity | EN61000-6-2:2005 |
Programming instructions | |
| Profile | S-7.A.0 |
| IO code | 7 |
| ID code | A |
| ID1 code | 7 |
| ID2 code | 0 |
| Data bits (function via AS-Interface) | input output |
| Parameter bits (programmable via AS-i) | function |
Ambient conditions | |
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Relative humidity | 85 % , noncondensing |
| Climatic conditions | For indoor use only |
| Altitude | ? 2000 m above MSL |
| Pollution degree | 3 |
Mechanical specifications | |
Описание оборудования- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |