Light grid LGS8
Описание
Информация для заказа
Описание оборудования | |
|---|---|
| Automation light grid with beam spacing of 8 mm, IO-Link interface, push-pull output, fixed cable with M12 plug | |
General specifications | |
| Effective detection range | Standard : 0.3 ... 6 m Option /35: 0.5 ... 8 m |
| Threshold detection range | Standard : 7.5 m Option /35: 10 m |
| Light source | IRED |
| Light type | modulated infrared light , 850 nm |
| Field height | see Table 1, max. 2100 mm |
| Beam crossover | Factory setting: three beam crossing, deactivateable |
| Beam blanking | adjustable max. 2 fixed suppressible beam areas (blanking) |
| Beam spacing | 8.33 mm |
| Number of beams | see Table 1, max. 253 |
| Operating mode | Emitter: Emitter power adjustable in two ranges |
| Optical resolution | without beam crossover: 8 mm with beam crossover: 4 mm with in 25% and 75% of the range |
| Angle of divergence | 10 ° |
| Ambient light limit | > 50000 Lux (if external light source is outside the opening angle) |
Functional safety related parameters | |
| MTTFd | 21 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 60 % |
Indicators/operating means | |
| Operation indicator | Power on: LED green, statically lit , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator | Emitter: Yellow LED, illuminates at high emitting power, off at low emitting power Receiver: Yellow LED: illuminates when an object is detected flashes when falling short of the stability control (4Hz) Error message: Yellow LED flashes (8Hz) in emitter and receiver |
| Control elements | Receiver: 2 touch buttons for programming |
| Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
Electrical specifications | |
| Operating voltage | 18 ... 30 V DC |
| Ripple | 10 % |
| No-load supply current | Emitter ?: 50 mA Receiver: ? 150 mA (without outputs) |
| Time delay before availability | see Table 1, max. 3.8 s |
Interface | |
| Interface type | IO-Link |
| Protocol | IO-Link V1.0 |
| Mode | COM2 (38.4 kBaud) |
Input | |
| Test input | Emitter switch-off with +UB or 0V at pin 4 (emitter) |
| Function input | Range input activation from 1.6 m (or 2 m in case of optИли отправьте нам запрос на pin 2 (emitter) Teach-In input for programming on pin 8 (receiver) |
Output | |
| Pre-fault indication output | Stability Control (SC) 1 PNP, short-circuit protected, reverse polarity protected on pin 2 (receiver) |
| Switching type | Factory setting: dark on , Switchable to light-on mode |
| Signal output | Switch output (detection field C/Q) 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected on pin 4 (receiver), Height monitoring (H1, H2. H3) 3 push-pull (4 in 1) outputs, short-circuit proof, reverse polarity protecИли отправьте нам запрос на(receiver) |
| Switching threshold | Factory setting: The signal tracking for the threshold value is deactivated, increasing the optical resolution by a maximum of 4mm; switchable to active signal tracking |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Voltage drop | ? 2 V DC |
| Switching frequency | see Table 1, max. 118 Hz |
| Response time | see Table 1, max. 20 ms |
| Timer function< | |
Описание оборудования- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |