Light grid LGS17
Описание
Информация для заказа
Описание оборудования | |
---|---|
Automation light grid with beam spacing of 17 mm, IO-Link interface, push-pull output, fixed cable with M12 plug | |
General specifications | |
Effective detection range | Standard : 0.3 ... 6 m Option /35: 0.5 ... 8 m |
Threshold detection range | Standard : 7.5 m Option /35: 10 m |
Light source | IRED |
Light type | modulated infrared light , 850 nm |
Field height | see Table 1, max. 3200 mm |
Beam crossover | Factory setting: three beam crossing, deactivateable |
Beam blanking | adjustable max. 2 fixed suppressible beam areas (blanking) |
Beam spacing | 16.67 mm |
Number of beams | see Table 1, max. 193 |
Operating mode | Emitter: Emitter power adjustable in two ranges |
Optical resolution | without beam crossover: 17 mm with beam crossover: 8.5 mm with in 25% and 75% of the range |
Angle of divergence | 10 ° |
Ambient light limit | > 50000 Lux (if external light source is outside the opening angle) |
Functional safety related parameters | |
MTTFd | 25 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 60 % |
Indicators/operating means | |
Operation indicator | Power on: LED green, statically lit , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
Function indicator | Emitter: Yellow LED, illuminates at high emitting power, off at low emitting power Receiver: Yellow LED: illuminates when an object is detected flashes when falling short of the stability control (4Hz) Error message: Yellow LED flashes (8Hz) in emitter and receiver |
Control elements | Receiver: 2 touch buttons for programming |
Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
Electrical specifications | |
Operating voltage | 18 ... 30 V DC |
Ripple | 10 % |
No-load supply current | Emitter ?: 50 mA Receiver: ? 150 mA (without outputs) |
Time delay before availability | see Table 1, max. 3 s |
Interface | |
Interface type | IO-Link |
Protocol | IO-Link V1.0 |
Mode | COM2 (38.4 kBaud) |
Input | |
Test input | Emitter switch-off with +UB or 0V at pin 4 (emitter) |
Function input | Range input activation from 1.6 m (or 2 m in case of optИли отправьте нам запрос на pin 2 (emitter) Teach-In input for programming on pin 8 (receiver) |
Output | |
Pre-fault indication output | Stability Control (SC) 1 PNP, short-circuit protected, reverse polarity protected on pin 2 (receiver) |
Switching type | Factory setting: dark on , Switchable to light-on mode |
Signal output | Switch output (detection field C/Q) 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected on pin 4 (receiver), Height monitoring (H1, H2. H3) 3 push-pull (4 in 1) outputs, short-circuit proof, reverse polarity protecИли отправьте нам запрос на(receiver) |
Switching threshold | Factory setting: The signal tracking for the threshold value is deactivated, increasing the optical resolution by a maximum of 4mm; switchable to active signal tracking |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA |
Voltage drop | ? 2 V DC |
Switching frequency | see Table 1, max. 129 Hz |
Response time | see Table 1, max. 16 ms |
Timer functi |
- Цена: Цену уточняйте
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
День | Время работы |
---|---|
Понедельник | 09:00-17:00 |
Вторник | 09:00-17:00 |
Среда | 09:00-17:00 |
Четверг | 09:00-17:00 |
Пятница | 09:00-17:00 |
Суббота | Выходной |
Воскресенье | Выходной |