Retroreflective sensor (glass) OBG8000-R200-2EP-IO-V31
Описание
Информация для заказа
Описание оборудования | |
---|---|
Retroreflective sensor with polarization filter for clear object detection | |
General specifications | |
Effective detection range | 0 ... 5.6 m in TEACH modИли отправьте нам запрос наsition "N" |
Reflector distance | 0 ... 5.6 m in TEACH modИли отправьте нам запрос наsition "N" |
Threshold detection range | 9 m |
Reference target | H85-2 reflector |
Light source | LED |
Light type | modulated visible red light |
LED risk group labelling | exempt group |
Polarization filter | yes |
Diameter of the light spot | approx. 170 mm at a distance of 3.5 m |
Angle of divergence | approx. 5 ° |
Ambient light limit | EN 60947-5-2 : 18000 Lux |
Functional safety related parameters | |
MTTFd | 600 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means | |
Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4Hz) - insufficient operating reserve |
Control elements | Teach-In key |
Control elements | 5-step rotary switch for operating modes selection |
Contrast detection levels | 10 % - clean, water filled PET bottles 18 % - clear glass bottles 40 % - colored glass or opaque materials Adjustable via rotary switch |
Electrical specifications | |
Operating voltage | 10 ... 30 V DC |
Ripple | max. 10 % |
No-load supply current | < 25 mA at 24 V supply voltage |
Protection class | III |
Interface | |
Interface type | IO-Link ( via C/Q = pin 4 ) |
Device profile | Identification and diagnosis Smart Sensor type 2.4 |
Transfer rate | COM2 (38.4 kBaud) |
IO-Link Revision | 1.1 |
Min. cycle time | 2.3 ms |
Process data witdh | Process data input 2Bit Process data output 2Bit |
SIO mode support | yes |
Device ID | 0x111A01 (1120769) |
Compatible master port type | A |
Output | |
Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA , resistive load |
Usage category | DC-12 and DC-13 |
Voltage drop | ? 1.5 V DC |
Switching frequency | 500 Hz |
Response time | 1 ms |
Conformity | |
Communication interface | IEC 61131-9 |
Product standard | EN 60947-5-2 |
Approvals and certificates | |
UL approval |
- Цена: Цену уточняйте
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
День | Время работы |
---|---|
Понедельник | 09:00-17:00 |
Вторник | 09:00-17:00 |
Среда | 09:00-17:00 |
Четверг | 09:00-17:00 |
Пятница | 09:00-17:00 |
Суббота | Выходной |
Воскресенье | Выходной |