OOO "ФилФар Технолоджи"

103013484 | AZM201Z-I2-SK-T-1P2PW

  103013484 | AZM201Z-I2-SK-T-1P2PW
Под заказТолько оптом

Цену уточняйте

  • +375 показать номер +375(44)765-55-50
  • +375(29)690-11-55

Заказ только по телефону

  • Контакты
    • Телефон:
    • Контактное лицо:
      Сергей, Владимир
    • Адрес:
      ул. Западная, д.13, каб.519, Минск, Беларусь
    • Email:

Техническая спецификация в PDF  

Ordering details

Product type descriptionAZM201Z-I2-SK-T-1P2PW
Article number103013484
EAN Code4030661493275


Approval TÜV


Interlocking function:
StandardsEN ISO 13849-1, IEC 61508, IEC 62061
Control category4
PFH value1.9 x 10−9 / h
PFD value1.6 x 10−4
SILSuitable for SIL 3 applications
Mission time20 Years
Guard locking function:
StandardsISO 13849-1, IEC 61508, IEC 62061
Control category2
PFH value1.0 x 10−8 / h
PFD value8.9 x 10−4
SILSuitable for SIL 3 applications
Mission time20 Years

Global Properties

Permanent lightAZM201
StandardsIEC 60947-5-1, IEC 60947-5-3, ISO 14119, ISO 13849-1, IEC 61508, IEC 62061
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)Yes
Protection ratingIII
Series-wiringup to 31 components
Length of the sensor chain200 m
Active principleRFID
Duty cycle100
Coding levels according to ISO 14119High
CodingIndividual coding, multiple teaching
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
Housing coatingNone
Guard locking monitored (Y/N)Yes
Actuator monitored (Y/N)No
Idle assignable pushbutton and LED (Y/N)No
Response time
Actuator≤ 100
Duration of risk<>
Time to readiness<>
Recommended actuatorAZ/AZM201-B1, AZ/AZM201-B30
- Actuator≤ 100 ms
- Inputs≤ 0,5 ms

Mechanical data

Design of electrical connectionScrew connection
Cable section
- Min. Cable section0,25 mm²
- Max. Cable section1.5 mm²
AWG-Number23 - 15
Mechanical life≥ 1.000.000 operations
noticeAll indications about the cable section are including the conductor ferrules.
restistance to shock30 / 11
Resistance to vibration10 … 150 HZ, Amplitude 0,35 mm
Emergency unlocking device (Y/N)No
Manual release (Y/N)Yes
Emergency release (Y/N)No
Latching force30
Clamping force2000
Max. Actuating speed≤ 0,2

Ambient conditions

Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+60
Storage and transport temperature
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+85
Relative humidity30… 95
- non-condensing
Protection classIP66, IP67 to IEC 60529
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage0,8
- Overvoltage categoryIII
- Degree of pollution3

Electrical data

Number of auxiliary contacts0
Number of safety contacts2
Cross circuit/short circuit recognition possible (Y/N)Yes
Power to unlockYes
Power to lockNo
Supply voltage
- Min. supply voltage20.4 V DC
- Max. supply voltage26.4 V DC
Switch frequency1
Rated insulation voltage32 V DC
Operating current1.2 A
Utilisation categoryDC-13
No-load current0,6 A
Device insulation≤ 4 A if used in accordance with UL 508

Electrical data - Safety inputs

Safety inputsX1 and X2
Rated operating voltage-3 … 5 (Low)
15 … 30 (High)
Operating currenttypically 2 at 24

Electrical data - Safety outputs

Safety outputsY1 and Y2
Fuse ratingshort-circuit proof, p-type
Rated operating voltage0 … 4 under
Residual current≤ 0,5
Operating currentmax. each 0,25 A
Utilisation categoryDC-13

Electrical data - Diagnostic output

Serial diagnostics (Y/N)No
Fuse ratingp-type, short-circuit proof
Operating current0,05 A
Utilisation categoryDC-13: 24 V / 0,05 A
Wiring capacitance for serial diagnostics-
diagnostic signalsguard door closed and interlocking device locked
Operating principle of the diagnostic outputThe short-circuit proof diagnostic output OUT can be used for central visualisation or control tasks, e.g. in a PLC.
noticeThe diagnostic output is not a safety-relevant output!

Electrical data - Solenoid control IN

Rated operating voltage Ue-3 V … 5 V (Low)
15 V … 30 V (High)
Operating current Ietypically 10 mA at 24 V, dynamically 20 mA
Control command

LED switching conditions display

LED switching conditions display (Y/N)Yes
LED switching conditions display
- Supply voltagegreen LED
- switching conditionyellow LED
- Error functional defectred LED


Explosion protection categories for gasesNone
Explosion protected category for dustsNone


Dimensions of the sensor
- Width of sensor40 mm
- Height of sensor220
- Length of sensor50


As lons as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. The safety outputs then will be enabled again; opening the safety guard therefore is not required.

Included in delivery

Included in deliveryAZM201
Triangular key
Actuators must be ordered separately.


По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:


8 (029) 555-8-000


8 (044) 555-8-000


8 (017) 255-8-000

Или отправьте нам запрос на e-mail:


Информация для заказа
  • Цена: Цену уточняйте
  • Телефон:
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, Беларусь
  • Email: