Ordering details | |
|---|---|
| Product type description | AZ 17-02ZRI-B5 - Ordering suffix |
| Article number | 101136309 |
| EAN Code | 4030661056494 |
| eCl@ss | 27-27-26-02 |
Approval | |
| Approval |  BG USA/CAN |
Classification | |
| Standards | EN ISO 13849-1 |
| B10d Normally-closed contact (NC) | 2.000.000 |
| Mission time | 20 Years |
| notice |  |
Global Properties | |
| Permanent light | AZ 17ZI |
| Standards | EN 60947-5-1, BG-GS-ET-15 |
| Materials | |
| - Material of the housings | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| - Material of the actuator | Stainless steel |
| - Material of the contacts | Silver |
| Housing coating | None |
| Weight | 100 |
Mechanical data | |
| Design of electrical connection | IDC method of termination |
| Cable section including conductor ferrules | |
| - Min. Cable section | 1 x 0,75 |
| - Max. Cable section | 2 x 1.0, flexible |
| Mechanical life | > 1.000.000 operations |
| higher Latching force (Y/N) | Yes |
| Latching force | 30 |
| Positive break force | 17 N |
| positive break travel | 11 mm |
| Max. Actuating speed | 2 m/s |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −30 °C |
| - Max. environmental temperature | +80 °C |
| Protection class | IP67 to IEC/EN 60529 |
Electrical data | |
| Design of control element | Opener (NC) |
| Switching principle | Creep circuit element |
| Number of auxiliary contacts | 0 |
| Number of safety contacts | 2 |
| Supply voltage | |
| - Min. supply voltage | |
| - Max. supply voltage | 230 V |
| Rated impulse withstand voltage Uimp | 4 kV |
| Rated insulation voltage Ui | 250 V |
| Thermal test current Ithe | 10 A |
| Utilisation category | AC-15: 230 V / 4 A DC-13: 24 V / 4 A |
| Max. fuse rating | 6 A gG D-fuse |
ATEX | |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
Dimensions | |
| Dimensions of the sensor | |
| - Width of sensor | 30 |
| - Height of sensor | 85 |
| - Length of sensor | 30 |
notice | |
| On hinged guards, minimum actuating radius at 90° to the plane of the actuator 140 mm | |
| minimum actuating radius on hinged guards in line with the plane of the actuator 200 mm | |
| The axis of the hinge should be 13 mm above the top edge of the safety switch and in the same plane | |
| The actuator is not available separately. | |
| This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules | |
Included in delivery | |
| Not available as spare part | |
| Included in delivery | |
| • Individually coded actuator | |
| • tamperproof screws | |
| • Slot sealing plugs | |
Diagram | |
 Note Diagram  positive break NC contact active no active Normally-open contact Normally-closed contact | |
Switch travel diagram | |
 Notes Switch travel diagram  Contact closed Contact open Setting range Break point Positive opening sequence/- angleVSadjustable range of NO contact VÖadjustable range of NC contact Nafter travel | |
| ...-2243 | Cable output: front |
| ...-2243 -1 | Cable output: rear |
| ...-1637 | 0,3 µm gold-plated contacts |
| ...-6m | Cable length 6 Meter |
| ...-5m | Cable length 5 Meter |
Ordering details
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
