TV8S 355-11Z-ST
Описание
Информация для заказа
Ordering details | |
|---|---|
| Product type description | TV8S 355-11Z-ST - Ordering suffix |
| Article number | TV8S 355-11z-ST |
| EAN Code | |
| eCl@ss | 27-27-26-01 |
Approval | |
| Approval |  BG USA/CAN CCC |
Classification | |
| Standards | EN ISO 13849-1 |
| B10d Normally-closed contact (NC) | 20.000.000 |
| Mission time | 20 Years |
| notice |  |
Global Properties | |
| Permanent light | TV.S 355 |
| Standards | EN 60947-5-1, BG-GS-ET-15 |
Compliance with the Directives (Y/N)  | Yes |
| Materials | |
| - Material of the housings | Aluminium |
| - Material of the contacts | Silver |
| Housing coating | painted |
Mechanical data | |
| Design of electrical connection | Connector M12 |
| Cable entry M 20 x 1.5 | 2 |
| Design of actuating element | Other |
| Mechanical life | > 1.000.000 operations |
| Switching frequency | max. 1000 /h |
| Shaft bore | Ø 8 |
| Positive break angle | 7 ° |
| Positive break torque | 60 Ncm |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −25 °C |
| - Max. environmental temperature | +70 °C |
| Protection class | IP67 |
Electrical data | |
| Design of control element | Opener (NC) |
| Switching principle | Creep circuit element |
| Number of auxiliary contacts | 1 |
| Number of safety contacts | 1 |
| Rated impulse withstand voltage Uimp | 0,8 kV |
| Rated insulation voltage Ui | 50 V |
| Thermal test current Ithe | 10 A |
| Utilisation category | AC-15: 50 V / 4 A, DC-13: 24 V / 4 A |
| Max. fuse rating | 6 A gG D-fuse |
ATEX | |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
Dimensions | |
| Dimensions of the sensor | |
| - Width of sensor | 66.7 mm |
| - Height of sensor | 107 mm |
| - Length of sensor | 65.3 mm |
notice | |
| Setting assistance | Grub screw for location, shaft pre-drilled for pin |
| Universal joint available to compensate for axial displacement (only for shaft bore 10 mm) | |
| By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is needed for this purpose. Even when the screw is removed, the head is se | |
Ordering details- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |