Ordering details | |
|---|---|
| Product type description | TESZ1102/35 |
| Article number | 101030515 |
| EAN Code | |
| eCl@ss | 27-27-26-01 |
Approval | |
| Approval |    |
Classification | |
| Standards | EN ISO 13849-1 |
| B10d Normally-closed contact (NC) | 2.000.000 |
| B10d Normally open contact (NO) | 1.000.000 |
| Mission time | 20 Years |
| notice |  |
Global Properties | |
| Permanent light | TESZ |
| Standards | IEC/EN 60947-5-1, BG-GS-ET-15 |
Compliance with the Directives (Y/N)  | Yes |
| Materials | |
| - Material of the housings | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| - Material of the contacts | Silver |
| - Material of the hinge | Aluminium |
| Housing coating | None |
| Weight | 468 |
Mechanical data | |
| Design of electrical connection | Screw connection |
| Cable entry M 20 x 1.5 | 2 |
| Cable section | |
| - Min. Cable section | 0,5 |
| - Max. Cable section | 1 |
| Mechanical life | > 1.000.000 operations |
| Switching frequency | 120 |
| notice | All indications about the cable section are including the conductor ferrules. |
| Positive break angle | 10 |
| Positive break force | 1 |
| additional hinge (Y/N) | Yes |
| mounting hinge (Y/N) | Yes |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +65 |
| Protection class | IP65 |
Electrical data | |
| Design of control element | Normally open contact (NO), Opener (NC) |
| Switching principle | Creep circuit element |
| Number of auxiliary contacts | 1 |
| Number of safety contacts | 2 |
| Rated impulse withstand voltage | 2.5 |
| Rated insulation voltage | 250 |
| Thermal test current | 2.5 A |
| Utilisation category | AC-15: 230 V / 2 A, DC-13: 24 V / 1 A |
| Max. fuse rating | 2 A gG D-fuse |
ATEX | |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
Dimensions | |
| Dimensions of the sensor | |
| - Width of sensor | 111.5 |
| - Height of sensor | 92 |
| - Length of sensor | 36 |
| Suitable for mounting to profile systems | 35 |
notice | |
| The additional hinge including mounting accessories is also available separately, part number Z 400 | |
| The opening angle has been set to 4° in factory. | |
Diagram | |
 Note Diagram  positive break NC contact active no active Normally-open contact Normally-closed contact | |
Switch travel diagram | |
 Notes Switch travel diagram  Contact closed Contact open Setting range Break point Positive opening sequence/- angleVSadjustable range of NO contact VÖadjustable range of NC contact Nafter travel | |
Ordering details
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
