Ordering details | |
|---|---|
| Product type description | T5C 236-11Z-ST - Ordering suffix |
| Article number | T5C 236-11Z-ST |
| EAN Code | |
| eCl@ss | 27-27-26-01 |
Approval | |
| Approval |  USA/CAN CCC EAC |
Classification | |
| Standards | EN ISO 13849-1 |
| B10d Normally-closed contact (NC) | 20.000.000 |
| Mission time | 20 Years |
| notice |  |
Global Properties | |
| Permanent light | T.C 236 Rechtsausführung |
| Standards | EN 60947-5-1, BG-GS-ET-15 |
Compliance with the Directives (Y/N)  | Yes |
| Materials | |
| - Material of the housings | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| - Material of the actuator | Stainless steel |
| - Material of the contacts | Silver |
| Housing coating | None |
Mechanical data | |
| Design of electrical connection | Connector M12 |
| Mechanical life | > 1.000.000 operations |
| Switching frequency | max. 5000 /h |
| Design of actuating element | Swivel lever |
| Opening angle | 180 ° |
| Positive break angle | 12.5 ° |
| Positive break torque | 18.5 Ncm |
| actuator | 78 mm |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −30 °C |
| - Max. environmental temperature | +80 °C |
| Protection class | IP67 |
Electrical data | |
| Design of control element | Normally open contact (NO), Opener (NC) |
| Switching principle | Creep circuit element |
| Number of auxiliary contacts | 1 |
| Number of safety contacts | 1 |
| Rated impulse withstand voltage Uimp | 0,8 kV |
| Rated insulation voltage Ui | 50 V |
| Thermal test current Ithe | 10 A |
| Utilisation category | AC-15: 50 V / 4 A, DC-13: 24 V / 1 A |
| Max. fuse rating | 6 A gG D-fuse |
| notice | Caution! The versions with connector may only be used in PELV circuits to EN 60204-1. |
ATEX | |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
Dimensions | |
| Dimensions of the sensor | |
| - Width of sensor | 30 |
| - Height of sensor | 161 |
| - Length of sensor | 30 |
Diagram | |
 Note Diagram  positive break NC contact active no active Normally-open contact Normally-closed contact | |
...-2310  | M12 connector with B-coding Rated impulse withstand voltage Uimp: 0,8 kV Rated insulation voltage Ui: 50 V Operating current Ie: AC-15: 50 V / 4 A Caution! The versions with connector may only be used in PELV circuits to EN 60204-1. |
Ordering details
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
