OOO "ФилФар Технолоджи"

103003606 | RSS260-I1-D-ST

  103003606 | RSS260-I1-D-ST
Под заказТолько оптом

Цену уточняйте

  • +375 показать номер +375(44)765-55-50
  • +375(29)690-11-55

Заказ только по телефону

  • Контакты
    • Телефон:
      +375(44)765-55-50
      +375(29)690-11-55
    • Контактное лицо:
      Сергей, Владимир
    • Адрес:
      ул. Западная, д.13, каб.519, Минск, Беларусь
    • Email:
      zapros@filfar.by

Техническая спецификация в PDF  

Ordering details

Product type descriptionRSS260-I1-D-ST
Article number103003606
EAN Code
eCl@ss27-27-24-01

Approval

Approval

Classification

StandardsEN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 62061
PLbis e
Control categorybis 4
PFH value6.8 x 10−10/h
SIL3
Mission time20 Years
ClassificationPDF-M

Global Properties

Permanent lightRSS260
StandardsIEC 60947-5-3
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)Yes
FunctionSensor for series wiring
MountingA 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
Active principleRFID
Coding levels according to ISO 14119High
CodingIndividual coding
Materials
- Material of the housingsPlastic, thermoplastic, self-extinguishing
- Material of the active surfacePlastic, thermoplastic
Housing construction formBlock
Weight
Diagnostic output (Y/N)Yes
Reaction time≤ 100
Duration of risk≤ 200
Time to readiness≤ 2 s
Cascadable (Y/N)Yes
Recommended actuatorRST260-1, RST16-1, RST-U-2
Series-wiringup to 31 components

Mechanical data

Design of electrical connectionConnector M8
mechanical installation conditionsnot flush
Actuating planesActuation front side and lateral
Active areafront and lateral
Switch distancefront 12, lateral 9
Ensured switch distance ONfront 10, lateral 6
Ensured switch distance OFFfront 18, lateral 15
hysteresismax. 2 mm
Repeat accuracy R R< 0,5="">
noticeAxial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm.
see drawing: Operating principle

Minimum clearance between two sensor systems 100 mm
restistance to shock30 g / 11 ms
Resistance to vibration10 … 55 HZ, Amplitude 1 mm

Ambient conditions

Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+65
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+85
Protection classIP65, IP67 to IEC/EN 60529
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage Uimp0,8 kV
- Overvoltage categoryIII
- Degree of pollution3

Electromagnetic compatibility (EMC)

Interfering radiationto IEC 61000-6-4
EMC ratingto IEC 60947-3

Electrical data

Cross circuit/short circuit recognition possible (Y/N)Yes
Voltage typeDC
Switch frequency1
Rated insulation voltage32
Rated operating voltage Ue (stabilised PELV)
- Min. Rated operating voltage20.4 VDC
- Max. Rated operating voltage26.4 VDC
Operating current Ie0,6 A
No-load current I00,1 A
Required rated short-circuit current100 A
noticeThe cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current

Electrical data - Safety inputs

Safety inputsX1 and X2
Rated operating voltage Ue24 VDC − 15% / +10%

Electrical data - Safety outputs

Safety outputsY1 and Y2
Number of secure semi-conductor outputs2
Max. output current at secured output0,25 A
Residual current Ir≤ 0,5 mA
Operating current Iemax. 0,25 A
Utilisation categoryDC-12: 24 V / 0,25 A
DC-13: 24 V / 0,25 A

Electrical data - Diagnostic output

Serial diagnostics (Y/N)No
Fuse ratingshort-circuit proof
Design of control outputp-type
Number of semi-conductor outputs with signaling function1
Operating current0,05 A
Voltage drop<>
Utilisation categoryDC-12: 24 V / 0,05 A
DC-13: 24 V / 0,05 A
Wiring capacitance for serial diagnostics-

LED switching conditions display

LED switching conditions display (Y/N)Yes
Number of LED´s3
- green LEDSupply voltage
- red LEDError
- yellow LEDswitching condition

ATEX

Explosion protection categories for gasesNone
Explosion protected category for dustsNone

Dimensions

Dimensions of the sensor
- Width of sensor39.2 mm
- Height of sensor18
- Length of sensor29.5

Pin assignment

1 - A1 UeWhite
2 - X1 Safety input 1Brown
3 - A2 GNDgreen
4 - Y1 Safety output 1yellow
5 - OUT Diagnostic output OUTGrey
6 - X2 Safety input 2Pink
7 - Y2 Safety output 2Blue
8 - IN without functionred

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Цену уточняйте
Контакты
  • Телефон:
    +375(44)765-55-50
    +375(29)690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, Беларусь
  • Email:
    zapros@filfar.by
Карта