Ordering details | |
|---|---|
| Product type description | RSS16-I2-D-CC |
| Article number | 103004351 |
| EAN Code | |
| eCl@ss | 27-27-24-01 |
Approval | |
| Approval |    |
Classification | |
| Standards | EN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 62061 |
| PL | bis e |
| Control category | bis 4 |
| PFH | 6.3 x 10−11/h |
| SIL | 3 |
| Mission time | 20 Years |
Global Properties | |
| Permanent light | RSS16 |
| Standards | IEC 60947-5-3 |
Compliance with the Directives (Y/N)  | Yes |
| Suitable for safety functions (Y/N) | Yes |
| Function | Sensor for series wiring |
| Length of the sensor chain | 200 |
| Mounting | 2 x M5, Cylinder head screw |
| Active principle | RFID |
| Coding | Individual coding, multiple teaching |
| Coding levels according to ISO 14119 | High |
| Materials | |
| - Material of the active surface | Plastic, glass-fibre reinforced thermoplastic |
| - Material of the housings | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Housing construction form | Block |
| Weight | |
| Input for enabling pushbutton, suitable for automatic start (Y/N) | No |
| Input for reset pushbutton, with edge monitoring (Y/N) | No |
| Diagnostic output (Y/N) | Yes |
| Reaction time | ≤ 100 |
| Duration of risk | ≤ 200 |
| Time to readiness | ≤ 2 |
| Cascadable (Y/N) | Yes |
| Series-wiring | unlimited |
| Recommended actuator | RST16-1, RST-U-2 |
Mechanical data | |
| Design of electrical connection | Spring pulley connection |
| mechanical installation conditions | not flush |
| Actuating planes | front side, rear, Actuation from top |
| Active area | lateral, front side, cover-side |
| Switch distance | 15 |
| Ensured switch distance ON | 12 |
| Ensured switch distance OFF | 30 |
| hysteresis | 2 mm |
| Repeat accuracy R | < 0,5=""> |
| notice | The actuator mounting centric to the active sensor surface enables a max. height misalignment (X) of ± 27 mm in the vicinity. The axial misalignment (Y) amounts to max. ± 9 mm. see drawing: Operating principle Minimum distance between two safety sensors 250 mm |
| restistance to shock | 30 / 11 |
| Resistance to vibration | - |
| Latching (Y/N) | No |
| Latching force | - |
| Tightening torque for nuts | 2 |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +70 |
| Storage and transport temperature | |
| - Min. Storage and transport temperature | −25 |
| - Max. Storage and transport temperature | +85 |
| Protection class | IP65, IP67 to IEC/EN 60529 |
| Protection rating | - |
| Air clearances and creepage distances To IEC/EN 60664-1 | |
| - Rated impulse withstand voltage | 0,8 |
| - Overvoltage category | III |
| - Degree of pollution | 3 |
Electromagnetic compatibility (EMC) | |
| EMC rating | to IEC 60947-3 |
| Interfering radiation | to IEC 61000-6-4 |
Electrical data | |
| Cross circuit/short circuit recognition possible (Y/N) | Yes |
| Voltage type | DC |
| Switch frequency | 1 |
| Rated insulation voltage | 32 VDC |
| Rated operating voltage (stabilised PELV) | |
| - Min. Rated operating voltage | 20.4 VDC |
| - Max. Rated operating voltage | 26.4 VDC |
| Operating current | 2.1 A |
| No-load current | 0,1 A |
| Required rated short-circuit current | 100 A |
| notice | The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current |
Electrical data - Safety inputs | |
| Safety inputs | X1 and X2 |
| Rated operating voltage | 24 −15 / +10 |
Electrical data - Safety outputs | |
| Safety outputs | Y1 and Y2 |
| Fuse rating | short-circuit proof |
| Design of control output | p-type |
| Number of secure semi-conductor outputs | 2 |
| Max. output current at secured output | 1 A |
| Rated operating voltage | ( − 1) |
| Residual current | ≤ 0,5 |
| Operating current | 1 A |
| Minimum operating current | 0,5 |
| - Ambient temperature -25°C ... +70°C | ≤ 0,25 A |
| - Ambient temperature -25°C ... +65°C | ≤ 0,5 A |
| - Ambient temperature -25°C ... +55°C | ≤ 1 A |
| Utilisation category | DC-12: 24 V / 0,25 A DC-13: 24 V / 0,25 A |
| Voltage drop | <> |
Electrical data - Diagnostic output | |
| Serial diagnostics (Y/N) | Yes |
| Fuse rating | short-circuit proof |
| Design of control output | p-type |
| Number of semi-conductor outputs with signaling function | 1 |
| Rated operating voltage | ( − 2) |
| Operating current | 0,05 A |
| Voltage drop | <> |
| Utilisation category | DC-12: 24 V / 0,05 A DC-13: 24 V / 0,05 A |
| Wiring capacitance for serial diagnostics | 50 |
LED switching conditions display | |
| LED switching conditions display (Y/N) | Yes |
| Multi-coloured LED | green red |
| Number of LED´s | 2 |
| - green LED | Supply voltage |
| - red LED | Error |
| - yellow LED | switching condition |
ATEX | |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
Dimensions | |
| Dimensions of the sensor | |
| - Width of sensor | 52 |
| - Height of sensor | 30 |
| - Length of sensor | 91 |
Included in delivery | |
| Actuators must be ordered separately. | |
Ordering details
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
