OOO "ФилФар Технолоджи"

101214773 | RSS 36-I2-D-R-ST

  101214773 | RSS 36-I2-D-R-ST
Под заказТолько оптом

Цену уточняйте

  • +375 показать номер +375(44)765-55-50
  • +375(29)690-11-55

Заказ только по телефону

  • Контакты
    • Телефон:
      +375(44)765-55-50
      +375(29)690-11-55
    • Контактное лицо:
      Сергей, Владимир
    • Адрес:
      ул. Западная, д.13, каб.519, Минск, Беларусь
    • Email:
      zapros@filfar.by

Техническая спецификация в PDF  

Ordering details

Product type descriptionRSS 36-I2-D-R-ST
Article number101214773
EAN Code4030661413396
eCl@ss27-27-24-01

Approval

Approval TÜV
USA/CAN
ECOLAB
EAC

Classification

StandardsEN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 62061
PLbis e
Control categorybis 4
PFH2.7 x 10−10/h
SIL3
Mission time20 Years
ClassificationPDF-M

Global Properties

Permanent lightRSS 36
StandardsIEC 60947-5-3
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)Yes
FunctionSensor for series wiring
Series-wiringup to 31 components
Length of the sensor chainmax. 30 m
MountingFor the assembly of the sensors as well as for flat mounted actuators 25 mm screw length is usually sufficient. The 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing disks are used.
Active principleRFID
Coding levels according to ISO 14119High
CodingIndividual coding, multiple teaching
Materials
- Material of the active surfacePlastic, glass-fibre reinforced thermoplastic
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
Housing construction formBlock
Weight
Input for enabling pushbutton, suitable for automatic start (Y/N)No
Input for reset pushbutton, with edge monitoring (Y/N)No
Diagnostic output (Y/N)Yes
Reaction time≤ 100
Duration of risk≤ 200
Time to readiness≤ 5 s
Cascadable (Y/N)Yes
Recommended actuatorRST 36-1, RST 36-1-R

Mechanical data

Design of electrical connectionConnector M12, 8-pole
mechanical installation conditionsnot flush
Actuating planesActuation from side
Active arealateral
Switch distance Sn12 mm
Ensured switch distance ON Sao10 mm
Ensured switch distance OFF Sar20 mm
hysteresismax. 2 mm
Repeat accuracy R R< 0,5="">
noticeAxial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm.
see drawing: Operating principle

minimum distance 100 mm in case of approach from side
restistance to shock30 g / 11 ms
Resistance to vibration10 … 55 HZ, Amplitude 1 mm
Latching (Y/N)Yes
Latching force18

Ambient conditions

Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Storage and transport temperature
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+85
Temperature resistance cable
- min. Temperature resistance−30 in position of rest, −10 in Movement
- max. Temperature resistance+105
Protection classIP65, IP67, IP69 to IEC/EN 60529
Protection ratingIII
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage Uimp0,8 kV
- Overvoltage categoryIII
- Degree of pollution3

Electromagnetic compatibility (EMC)

EMC ratingto IEC 60947-3
Interfering radiationto IEC 61000-6-4

Electrical data

Cross circuit/short circuit recognition possible (Y/N)Yes
Voltage typeDC
Switch frequency1
Rated insulation voltage Ui32 VDC
Rated operating voltage Ue (stabilised PELV)
- Min. Rated operating voltage20.4 VDC
- Max. Rated operating voltage26.4 VDC
Operating current Ie0,6 A
No-load current I00,1 A
Required rated short-circuit current100 A
noticeThe cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current

Electrical data - Safety inputs

Safety inputsX1 and X2
Rated operating voltage Ue24 VDC −15% / +10%

Electrical data - Safety outputs

Safety outputsY1 and Y2
Fuse ratingshort-circuit proof
Design of control outputp-type
Number of secure semi-conductor outputs2
Max. output current at secured output0,25 A
Rated operating voltagemin. (Ue − 1 V)
Residual current Ir≤ 0,5 mA
Operating current Iemax. 0,25 A
- Ambient temperature: −25 °C … +70 °C≤ 0,1 A
Minimum operating current Im0,5 mA
- Ambient temperature: −25 °C … +65 °C≤ 0,25 A
Utilisation categoryDC-12: 24 V / 0,25 A
DC-13: 24 V / 0,25 A
Voltage drop Ud< 1="">

Electrical data - Diagnostic output

Serial diagnostics (Y/N)No
Fuse ratingshort-circuit proof
Design of control outputp-type
Number of semi-conductor outputs with signaling function1
Rated operating voltageUe < 2 V
Operating current Iemax. 0,05 A
Utilisation categoryDC-12: 24 V / 0,05 A
DC-13: 24 V / 0,05 A

LED switching conditions display

LED switching conditions display (Y/N)Yes
Number of LED´s3
green LEDSupply voltage
red LEDError
yellow LEDswitching condition

ATEX

Explosion protection categories for gasesNone
Explosion protected category for dustsNone

Dimensions

Dimensions of the sensor
- Width of sensor106.3
- Height of sensor25
- Length of sensor22

Pin assignment

1 - A1 UeBrown
2 - X1 Safety input 1White
3 - A2 GNDBlue
4 - Y1 Safety output 1Black
5 - OUT Diagnostic output OUTGrey
6 - X2 Safety input 2violet
7 - Y2 Safety output 2red
8 - IN without functionPink

notice

Requirements for the safety monitoring module2-channel safety input, suitable for p-type sensors with NO function. The safety monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0,25 ms. The safety monitoring module does not need to have a cross-wire short monitoring function.
noticeCoding procedure: teaching of the individual coding of a RST actuator through a simple routine during start-up (as -I1). A protected coding process enables teaching a new actuator in case of maintenance.

Included in delivery

Actuators must be ordered separately.

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Цену уточняйте
Контакты
  • Телефон:
    +375(44)765-55-50
    +375(29)690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, Беларусь
  • Email:
    zapros@filfar.by
Карта