Ordering details | |
|---|---|
| Product type description | EX-BNS 180-12Z-2187-2-3G/D 5,0M |
| Article number | 101192525 |
| EAN Code | 4030661352657 |
| eCl@ss | 27-27-24-02 |
Approval | |
| Approval | ATEX |
Classification | |
| Standards | EN ISO 13849-1 |
| B10d Normally-closed contact/Normally open contact (NC/NO) | 25.000.000 |
| - notice | at max. 20% contact load |
| Mission time | 20 Years |
| notice |  |
Global Properties | |
| Permanent light | EX-BNS 180 |
| Standards | IEC 60947-5-3, EN 60079-0, EN 60079-15, EN 60079-31, BG-GS-ET-14 |
Compliance with the Directives (Y/N)  | Yes |
| Materials | |
| - Material of the housings | Plastic, glass-fibre reinforced thermoplastic |
| - Material of the cable mantle | PVC |
| Housing construction form | cylinder, thread |
| Weight | 235 |
| Coding available (Y/N) | No |
| Monitoring function of downstream devices (Y/N) | No |
| Prerequisite evaluation unit | |
| Recommended safety-monitoring module | |
| Recommended actuator | BP 6, BP 8, BP 10, BP 15 SS |
Mechanical data | |
| Design of electrical connection | Cable |
| Cable length | 5 |
| Conductors | 6 x 0,25 |
| AWG-Number | 23 |
| mechanical installation conditions | quasi-flush |
| Active area | front side |
| Ensured switch distance ON Sao | 8 mm / 18 mm |
| - Actuating magnet BP 15 SS | 18 |
| - Actuating magnet BP 6 | 8 |
| - Actuating magnet BP 8 | 8 |
| - Actuating magnet BP 10 | 18 |
| Ensured switch distance OFF Sar | 22 mm / 32 mm |
| - Actuating magnet BP 10 | 28 |
| - Actuating magnet BP 8 | 20 |
| - Actuating magnet BP 15 SS | 28 |
| - Actuating magnet BP 6 | 20 |
| Type of actuation | Magnet |
| Direction of motion | head-on with regard to the active surface |
| restistance to shock | 30 g / 11 ms |
| Resistance to vibration | 10 … 55 HZ, Amplitude 1 mm |
| Impact energy | max. 2 Nm |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +70 |
| Storage and transport temperature | |
| - Min. Storage and transport temperature | −25 |
| - Max. Storage and transport temperature | +70 |
| Protection class | IP67 |
Electrical data | |
| Integrated Safety monitoring module available (Y/N) | No |
| Cross circuit/short circuit recognition possible (Y/N) | Yes |
| Voltage type | VAC/DC |
| Switch frequency | max. 5 HZ |
| Switching voltage | max. 120 VAC/DC |
| Switching current | max. 250 mA |
| Switching capacity | max. 5 W |
Outputs | |
| Design of control output | |
| Number of shutters | 1 |
| Number of openers | 2 |
| Design of output signal switching device | |
Electrical data - Safety outputs | |
| Number of secure semi-conductor outputs | 0 |
| Number of secure outputs with contact | 2 |
Electrical data - Diagnostic output | |
| Number of semi-conductor outputs with signaling function | 0 |
| Number of outputs with signaling function that already have a contact | 1 |
LED switching conditions display | |
| LED switching conditions display (Y/N) | No |
ATEX | |
| EX-marking | EX II 3D Ex tc IIIC T80°C Dc X EX II 3G Ex nC IIC T6 Gc X |
| Explosion protection categories for gases | 3G |
| Explosion protection Zones for gases | 2 |
| Explosion protected category for dusts | 3D |
| Explosion protection Zones for dusts | 22 |
Dimensions | |
| Dimensions of the sensor | |
| - Length of sensor | 36 |
| - Diameter of sensor | M18 |
notice | |
| Contact symbols shown for the closed condition of the guard device. | |
| The safety sensor must be mounted in such a way that actuation with another magnet is impossible (concealed mounting according to EN 1088) | |
Included in delivery | |
| Actuators must be ordered separately. | |
Keywords | |
| Keywords | Ex, EEx, ATEX, Ex BNS180, EX BNS 180, BNS 180 Ex, BNS180ex, BNS 180 ex, ATEX BNS 180 |
Diagram | |
 Note Diagram  positive break NC contact active no active Normally-open contact Normally-closed contact | |
Ordering details
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
