Ordering details | |
|---|---|
| Product type description | CSS 8-180-2P-Y-L |
| Article number | 101165294 |
| EAN Code | 4030661208787 |
| eCl@ss | 27-27-24-01 |
Approval | |
| Approval |  BG USA/CAN EAC |
Classification | |
| Standards | EN ISO 13849-1, IEC 61508, IEC 60947-5-3 |
| PL | up e |
| Control category | bis 4 |
| PFH | 2.5 x 10- 9 / h |
| SIL | bis 3 |
| Mission time | 20 Years |
| Classification | PDF-M |
Global Properties | |
| Permanent light | CSS 180 |
| Standards | IEC 61508, IEC 60947-5-3 |
Compliance with the Directives (Y/N)  | Yes |
| Suitable for safety functions (Y/N) | Yes |
| Function | Sensor for series wiring |
| Series-wiring | up to 16 components |
| Length of the sensor chain | max. 200 m |
| Active principle | inductive |
| Materials | |
| - Material of the housings | Plastic, glass-fibre reinforced thermoplastic |
| - Material of the nuts | Plastic, glass-fibre reinforced thermoplastic |
| - Material of the active surface | Plastic, glass-fibre reinforced thermoplastic |
| Housing construction form | cylinder, thread |
| Cable colour | Grey ( OUT), Black ( IN) |
| Weight | 167 |
| Reaction time | ≤ 30 |
| Duration of risk | ≤ 30 |
| Cascadable (Y/N) | Yes |
| Recommended actuator | CST 180-1, CST 180-2 |
Mechanical data | |
| Design of electrical connection | Cable |
| - Connector OUT | 4-pole |
| - Connector IN | 4-pole |
| Cable length | 2 ( OUT), 0,25 ( IN) |
| AWG-Number | |
| mechanical installation conditions | not flush |
| Switch distance Sn | 8 mm |
| Ensured switch distance ON Sao | 7 mm |
| Ensured switch distance OFF Sar | 10 mm |
| hysteresis | ≤ 0,7 mm |
| Repeat accuracy R R | ≤ 0,2 mm |
| restistance to shock | 30 g / 11 ms |
| Resistance to vibration | 10 … 55 HZ, Amplitude 1 mm |
| Tightening torque for nuts | A/F 24 max. 300 Ncm |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +60 |
| Storage and transport temperature | |
| - Min. Storage and transport temperature | −25 |
| - Max. Storage and transport temperature | +85 |
| Protection class | IP65, IP67 to IEC/EN 60529 |
| Protection rating | II |
| Air clearances and creepage distances To IEC/EN 60664-1 | |
| - Rated impulse withstand voltage Uimp | 0,8 kV |
| - Overvoltage category | III |
| - Degree of pollution | 3 |
Electrical data | |
| Cross circuit/short circuit recognition possible (Y/N) | Yes |
| Voltage type | DC |
| Supply voltage UB | |
| - Min. supply voltage | 20.4 V DC |
| - Max. supply voltage | 26.4 V DC |
| Switch frequency | 3 |
| Rated insulation voltage Ui | 32 V DC |
| Residual current Ir | ≤ 0,5 mA |
| Operating current Ie | 1 A |
| Utilisation category | DC-12: 24 V / 0,5 A DC-13: 24 V / 0,5 A |
| No-load current I0 | 0,05 A |
Electrical data - Safety inputs | |
| Safety inputs | X1 and X2 |
Electrical data - Safety outputs | |
| Safety outputs | Y1 and Y2 |
| Fuse rating | short-circuit proof, p-type |
| Design of control output | PNP |
| Number of secure semi-conductor outputs | 2 |
| Max. output current at secured output | 0,5 A |
| Rated operating voltage | 24 VDC |
| Operating current Ie | 0,5 A |
| Utilisation category | DC-12: 24 V / 0,5 A DC-13: 24 V / 0,5 A |
| Voltage drop Ud | max. 0,5 V |
Electrical data - Diagnostic output | |
| Number of semi-conductor outputs with signaling function | 0 |
LED switching conditions display | |
| LED switching conditions display (Y/N) | Yes |
| Multi-coloured LED | green, red, yellow |
ATEX | |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
Dimensions | |
| Dimensions of the sensor | |
| - Length of sensor | 92 |
| - Diameter of sensor | M18 |
Pin assignment | |
| 1 - A1 Ue | Brown |
| 2 - Y2 Safety output 2, X2 Safety input 2 | White |
| 3 - A2 GND | Blue |
| 4 - Y1 Safety output 1, X1 Safety input 1 | Black |
notice | |
| Requirements for the safety monitoring module | 2-channel safety input, suitable for p-type sensors with NO function. The safety monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 2 ms. The safety monitoring module does not need to have a cross-wire short monitoring function. |
Included in delivery | |
| Actuators must be ordered separately. | |
| Mounting accessories | 2 x Nuts M 18 x 1 |
Diagram | |
 Note Diagram  positive break NC contact active no active Normally-open contact Normally-closed contact | |
Ordering details
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
