OOO "ФилФар Технолоджи"

101169552 | CSS 8-180-2P+D-E-L

  101169552 | CSS 8-180-2P+D-E-L
Под заказТолько оптом

Цену уточняйте

  • +375 показать номер +375(44)765-55-50
  • +375(29)690-11-55

Заказ только по телефону

  • Контакты
    • Телефон:
      +375(44)765-55-50
      +375(29)690-11-55
    • Контактное лицо:
      Сергей, Владимир
    • Адрес:
      ул. Западная, д.13, каб.519, Минск, Беларусь
    • Email:
      zapros@filfar.by

Техническая спецификация в PDF  

Ordering details

Product type descriptionCSS 8-180-2P+D-E-L
Article number101169552
EAN Code4030661295954
eCl@ss27-27-24-01

Approval

Approval BG
USA/CAN
EAC

Classification

StandardsEN ISO 13849-1, IEC 61508, IEC 60947-5-3
PLup e
Control categorybis 4
PFH2.5 x 10- 9 / h
SILbis 3
Mission time20 Years
ClassificationPDF-M

Global Properties

Permanent lightCSS 180
StandardsIEC 61508, IEC 60947-5-3
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)Yes
FunctionIndividual sensor or end sensor in a series
Series-wiringup to 16 components
Length of the sensor chainmax. 200 m
Active principleinductive
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
- Material of the nutsPlastic, glass-fibre reinforced thermoplastic
- Material of the active surfacePlastic, glass-fibre reinforced thermoplastic
Housing construction formcylinder, thread
Cable colourGrey ( OUT)
Weight150
Reaction time≤ 30
Duration of risk≤ 30
Cascadable (Y/N)No
Recommended actuatorCST 180-1, CST 180-2

Mechanical data

Design of electrical connectionCable
- Connector OUT5-pole
- Connector IN-
Cable length2
Conductors0,35
AWG-Number22
mechanical installation conditionsnot flush
Switch distance Sn8 mm
Ensured switch distance ON Sao7 mm
Ensured switch distance OFF Sar10 mm
hysteresis≤ 0,7 mm
Repeat accuracy R R≤ 0,2 mm
restistance to shock30 g / 11 ms
Resistance to vibration10 … 55 HZ, Amplitude 1 mm
Tightening torque for nutsA/F 24 max. 300 Ncm

Ambient conditions

Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+60
Storage and transport temperature
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+85
Protection classIP65, IP67 to IEC/EN 60529
Protection ratingII
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage Uimp0,8 kV
- Overvoltage categoryIII
- Degree of pollution3

Electrical data

Cross circuit/short circuit recognition possible (Y/N)Yes
Voltage typeDC
Supply voltage UB
- Min. supply voltage20.4 V DC
- Max. supply voltage26.4 V DC
Switch frequency3
Rated insulation voltage Ui32 V DC
Residual current Ir≤ 0,5 mA
Operating current Ie1 A
Utilisation categoryDC-12: 24 V / 0,5 A
DC-13: 24 V / 0,5 A
No-load current I00,05 A

Electrical data - Safety outputs

Safety outputsY1 and Y2
Fuse ratingshort-circuit proof, p-type
Design of control outputPNP
Number of secure semi-conductor outputs2
Max. output current at secured output0,5 A
Rated operating voltage24 VDC
Operating current Ie0,5 A
Utilisation categoryDC-12: 24 V / 0,5 A
DC-13: 24 V / 0,5 A
Voltage drop Udmax. 0,5 V

Electrical data - Diagnostic output

Fuse ratingshort-circuit proof, p-type
Design of control outputPNP
Number of semi-conductor outputs with signaling function1
Rated operating voltage24 VDC
Operating current Ie0,05 A
Utilisation categoryDC-12, DC-13
Wiring capacitance for serial diagnosticsmax. 50 nF

LED switching conditions display

LED switching conditions display (Y/N)Yes
Multi-coloured LEDgreen, red, yellow

ATEX

Explosion protection categories for gasesNone
Explosion protected category for dustsNone

Dimensions

Dimensions of the sensor
- Length of sensor92
- Diameter of sensorM18

Pin assignment

1 - A1 UeBrown
2 - Y2 Safety output 2White
3 - A2 GNDBlue
4 - Y1 Safety output 1Black
5 - Signalling outputGrey

notice

Requirements for the safety monitoring module2-channel safety input, suitable for p-type sensors with NO function. The safety monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 2 ms. The safety monitoring module does not need to have a cross-wire short monitoring function.

Included in delivery

Actuators must be ordered separately.
Mounting accessories2 x Nuts M 18 x 1

Diagram



Note Diagram
positive break NC contact
active
no active
Normally-open contact
Normally-closed contact

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Цену уточняйте
Контакты
  • Телефон:
    +375(44)765-55-50
    +375(29)690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, Беларусь
  • Email:
    zapros@filfar.by
Карта