Ordering details | |
---|---|
Product type description | BNS 36-11/01Z-L |
Article number | 101193176 |
EAN Code | 4030661359854 |
eCl@ss | 27-27-24-02 |
Approval | |
Approval | ![]() ![]() ![]() |
Classification | |
Standards | EN ISO 13849-1 |
B10d Normally-closed contact/Normally open contact (NC/NO) | 25.000.000 |
- notice | at max. 20% contact load |
Mission time | 20 Years |
notice | ![]() |
Global Properties | |
Permanent light | BNS 36 |
Standards | IEC 60947-5-3, BG-GS-ET-14 |
Compliance with the Directives (Y/N) ![]() | Yes |
Category safety pursuant to EN ISO 13849-1 | up 4 - Only in combination with safety monitoring module |
Materials | |
- Material of the housings | Plastic, glass-fibre reinforced thermoplastic |
- Material of the cable mantle | PVC |
Weight | 69 |
Coding available (Y/N) | Yes |
Monitoring function of downstream devices (Y/N) | No |
Prerequisite evaluation unit | |
Recommended safety-monitoring module | |
Recommended actuator | BPS 36-1, BPS 36-2 |
Mechanical data | |
Design of electrical connection | Cable |
Cable length | 1 |
Conductors | 6 x 0,25 |
AWG-Number | 30 |
mechanical installation conditions | quasi-flush |
Active area | |
Ensured switch distance ON Sao | 7 mm |
Ensured switch distance OFF Sar | 17 mm |
notice | Axial misalignment The safety sensor and the actuator tolerate a horizontal and vertical misalignment to each other. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor is active in the tolerance range. |
Type of actuation | Magnet |
Direction of motion | head-on with regard to the active surface |
restistance to shock | 30 g / 11 ms |
Resistance to vibration | 10 … 55 HZ, Amplitude 1 mm |
Door hinge | left |
Ambient conditions | |
Ambient temperature | |
- Min. environmental temperature | −25 °C |
- Max. environmental temperature | +70 °C |
Storage and transport temperature | |
- Min. Storage and transport temperature | −25 °C |
- Max. Storage and transport temperature | +70 °C |
Protection class | IP67 |
Electrical data | |
Integrated Safety monitoring module available (Y/N) | No |
Cross circuit/short circuit recognition possible (Y/N) | Yes |
Voltage type | VDC |
Switch frequency | max. 5 HZ |
Switching voltage | max. 75 VDC |
Switching current | max. 400 mA |
Switching capacity | max. 10 W |
Outputs | |
Design of control output | |
Number of shutters | 1 |
Number of openers | 2 |
Design of output signal switching device | |
Electrical data - Safety outputs | |
Number of secure semi-conductor outputs | 0 |
Number of secure outputs with contact | 2 |
Electrical data - Diagnostic output | |
Number of semi-conductor outputs with signaling function | 0 |
Number of outputs with signaling function that already have a contact | 1 |
LED switching conditions display | |
LED switching conditions display (Y/N) | No |
ATEX | |
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
Dimensions | |
Dimensions of the sensor | |
- Width of sensor | 88 mm |
- Height of sensor | 25 mm |
- Length of sensor | 13 mm |
notice | |
Contact symbols shown for the closed condition of the guard device. | |
The contact configuration for versions with or without LED is identical. | |
Included in delivery | |
Actuators must be ordered separately. | |
Diagram | |
![]() Note Diagram ![]() ![]() ![]() ![]() ![]() |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by