Ordering details | |
---|---|
Product type description | BNS 303-11ZG 3,0M - Ordering suffix |
Article number | 101139171 |
EAN Code | 4030661282053 |
eCl@ss | 27-27-24-02 |
Approval | |
Approval | ![]() ![]() ![]() |
Classification | |
Standards | EN ISO 13849-1 |
B10d Normally-closed contact/Normally open contact (NC/NO) | 25.000.000 |
- notice | at max. 20% contact load |
Mission time | 20 Years |
notice | ![]() |
Global Properties | |
Permanent light | BNS 303 |
Standards | IEC 60947-5-3, BG-GS-ET-14 |
Compliance with the Directives (Y/N) ![]() | Yes |
Materials | |
- Material of the housings | Plastic, glass-fibre reinforced thermoplastic |
- Material of the nuts | thermoplastic |
- Material of the cable mantle | PVC |
Weight | 130 |
Coding available (Y/N) | Yes |
Monitoring function of downstream devices (Y/N) | No |
Prerequisite evaluation unit | |
Recommended safety-monitoring module | AES, SRB202C., SRB400C., SRB211AN, SRB207AN |
Recommended actuator | BPS 300 , BPS 303 , BPS 303 SS |
Mechanical data | |
Design of electrical connection | Cable |
Cable length | 3 |
Conductors | 4 x 0,25 |
AWG-Number | 23 |
mechanical installation conditions | quasi-flush |
Active area | |
Ensured switch distance ON Sao | 5 mm |
Ensured switch distance OFF Sar | 15 mm |
Type of actuation | Magnet |
Direction of motion | head-on with regard to the active surface |
restistance to shock | 30 g / 11 ms |
Resistance to vibration | 10 … 55 HZ, Amplitude 1 mm |
Tightening torque for nuts | A/F 36 max. 300 Ncm |
Ambient conditions | |
Ambient temperature | |
- Min. environmental temperature | −25 °C |
- Max. environmental temperature | +70 °C |
Storage and transport temperature | |
- Min. Storage and transport temperature | −25 °C |
- Max. Storage and transport temperature | +70 °C |
Protection class | IP67 |
Electrical data | |
Integrated Safety monitoring module available (Y/N) | No |
Cross circuit/short circuit recognition possible (Y/N) | Yes |
Voltage type | VDC |
Switch frequency | max. 5 HZ |
Switching voltage | max. 24 VDC |
Switching current | max. 10 mA |
Switching capacity | max. 240 mW |
Outputs | |
Design of control output | Other, Reed contakts |
Number of shutters | 1 |
Number of openers | 1 |
Design of output signal switching device | |
Electrical data - Safety outputs | |
Number of secure semi-conductor outputs | 0 |
Number of secure outputs with contact | 2 |
Electrical data - Diagnostic output | |
Number of semi-conductor outputs with signaling function | 0 |
Number of outputs with signaling function that already have a contact | 0 |
LED switching conditions display | |
LED switching conditions display (Y/N) | Yes |
- The LED is illuminated when the guard door is open. | |
ATEX | |
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
Dimensions | |
Dimensions of the sensor | |
- Length of sensor | 44 mm |
- Diameter of sensor | M30 |
notice | |
Contact symbols shown for the closed condition of the guard device. | |
The contact configuration for versions with or without LED is identical. | |
Included in delivery | |
Actuators must be ordered separately. | |
Mounting accessories - Nuts M 30 x 1,5 | 2 piece |
Diagram | |
![]() Note Diagram ![]() ![]() ![]() ![]() ![]() | |
...-2211 | higher switching distance Sar: 8 mm Sao: 18 mm |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by