Ordering details | |
|---|---|
| Product type description | UVH 433Y-3S - Ordering suffix |
| Article number | 101091680 |
| EAN Code | |
| eCl@ss | 27-27-06-01 |
Approval | |
| Approval |  EAC |
Global Properties | |
| Permanent light | U 433 Rollenschwenkhebel H |
| Standards | EN 60947-5-1 |
Compliance with the Directives (Y/N)  | Yes |
| Suitable for safety functions (Y/N) | No |
| Standard housing (Y/N) | No |
| Materials | |
| - Material of the housings | light alloy die-casting |
| - Roller material | Plastic |
| - Material of the contacts | Silver |
| Housing coating | painted |
| Weight | 500 |
| Slide form | Castor |
Mechanical data | |
| Design of electrical connection | Screw connection |
| Cable section | |
| - Min. Cable section | 1.5 |
| - Max. Cable section | 2.5 |
| AWG-Number | 13 |
| Active principle | mechanical |
| Mechanical life | 10.000.000 operations |
| Contact life | 2.000.000 operations, at 6 A / 400 V, cos φ = 0,4 |
| notice | All indications about the cable section are including the conductor ferrules. |
| Design of actuating element | Roller lever |
| Contact opening | 2 x 1.5 |
| Actuating speed with vertical actuating angle to switch axis | |
| - Min. Actuating speed | 1 |
| - Max. Actuating speed | 3 |
| - Actuating angle from left of switch axis | 30 |
| - Actuating angle from right of switch axis | 30 |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −20 |
| - Max. environmental temperature | +60 |
| Protection class | IP65 to IEC/EN 60529 |
Electrical data | |
| Design of control element | Normally open contact (NO), Opener (NC) |
| Switching principle | Creep circuit element |
| Number of shutters | 3 |
| Number of openers | 0 |
| Rated insulation voltage Ui | 500 V |
| Thermal test current Ithe | 16 A |
| Max. fuse rating | 16 A gG D-fuse |
Dimensions | |
| Dimensions of the sensor | |
| - Width of sensor | 62 |
| - Height of sensor | 163 |
| - Length of sensor | 50 |
| Roller wide | 8.5 |
| Roller diameter | 20 |
notice | |
| Type of contact and switching points can be factory set to order. | |
Diagram | |
 Note Diagram  positive break NC contact active no active Normally-open contact Normally-closed contact | |
Switch travel diagram | |
 Notes Switch travel diagram  Contact closed Contact open Setting range Break point Positive opening sequence/- angleVSadjustable range of NO contact VÖadjustable range of NC contact Nafter travel | |
| ...- 1272 | Version for low temperatures to -30°C |
| ...-RMS | Available with metal roller |
| ...- 1164 | Splined shaft and lever available with 10° toothing |
Ordering details
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
