Ordering details | |
|---|---|
| Product type description | MS 064-40Y |
| Article number | 101056952 |
| EAN Code | 4030661022673 |
| eCl@ss | 27-27-06-01 |
Approval | |
| Approval |  CCC EAC |
Global Properties | |
| Permanent light | 064 Druckbolzen S |
| Standards | EN 60947-5-1 |
Compliance with the Directives (Y/N)  | Yes |
| Suitable for safety functions (Y/N) | No |
| Standard housing (Y/N) | No |
| Materials | |
| - Material of the housings | cast iron, galvanized |
| - Material of the contacts | Silver |
| Housing coating | painted |
| Weight | 3570 |
| Slide form | Sphere |
Mechanical data | |
| Design of electrical connection | Screw connection |
| Cable section | |
| - Min. Cable section | 1.5 |
| - Max. Cable section | 4 |
| AWG-Number | 11 |
| Active principle | mechanical |
| Mechanical life | 30.000 operations |
| Switching frequency | max. 1000 /h |
| notice | All indications about the cable section are including the conductor ferrules. |
| Design of actuating element | Plunger |
| Contact opening | 2 x 4 |
| Actuating speed with vertical actuating angle to switch axis | |
| - Min. Actuating speed | 0,01 m/s |
| - Max. Actuating speed | 1 |
| - Actuating angle | 20 |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −30 |
| - Max. environmental temperature | +90 |
| Protection class | IP65 to IEC/EN 60529 |
Electrical data | |
| Design of control element | Normally open contact (NO) |
| - with double break | |
| - galvanically separated contact bridges | |
| Switching principle | Snap switch element |
| Number of shutters | 4 |
| Number of openers | 0 |
| Rated impulse withstand voltage Uimp | 6 kV |
| Rated insulation voltage Ui | 500 V |
| Thermal test current Ithe | 25 A |
| Utilisation category | AC-15: 400 V / 25 A |
| Max. fuse rating | 16 A gL/gG D-fuse |
Dimensions | |
| Dimensions of the sensor | |
| - Width of sensor | 156 |
| - Height of sensor | 111 |
| - Length of sensor | 149 |
| Slide diameter | 10 |
notice | |
| notice | Actuation from the side of the plunger should be avoided, since this reduces the mechanical life of the position switch. |
Diagram | |
 Note Diagram  positive break NC contact active no active Normally-open contact Normally-closed contact | |
Ordering details
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
