Ordering details | |
---|---|
Product type description | EX-BN 20-02Z-3G/D |
Article number | 101193763 |
EAN Code | 4030661356907 |
eCl@ss | 27-27-01-04 |
Approval | |
Approval | ![]() |
Global Properties | |
Permanent light | EX-BN 20 |
Standards | EN 60079-0, EN 60079-15, EN 60079-31 |
Compliance with the Directives (Y/N) ![]() | Yes |
Active principle | Magnetic drive |
Materials | |
- Material of the housings | light alloy die-casting, painted |
- Material of the active surface | Metal film |
Housing construction form | rectangular |
Weight | 330 |
Recommended actuator | 2 x BP 10, 2 x BP 15/2, BP 20, BP 31, BP 11, BP 12, BP 21, BE 20 |
Mechanical data | |
Design of electrical connection | Screw connection |
Cable cross-section of the cable glands | |
- Min. Cable cross-section of the cable glands | Ø 6 |
- Max. Cable cross-section of the cable glands | Ø 10 |
Mechanical life | 1.000.000.000 operations |
Electrical lifetime | 1.000.000 … 1.000.000.000 operations |
Actuating planes | Actuation from side |
Active area | lateral |
Switch distance Sn | 12 mm … 45 mm |
notice | Actuating distance up to 45 mm depending on actuating magnet and version |
Type of actuation | Magnet |
restistance to shock | 30 g / 11 ms |
Resistance to vibration | 10 … 55 HZ, Amplitude 1 mm |
resistant to vibration | 50 g, on sine wave oscillation |
Bounce duration | 0,3 … 0,6 |
Latching (Y/N) | No |
Impact energy | max. 4 J |
bias magnet (Y/N) | Yes |
Actuating speed | max. 18 m/s |
Switching point accuracy | ± 0,25 mm |
Ambient conditions | |
Ambient temperature | |
- Min. environmental temperature | −15 |
- Max. environmental temperature | +70 |
Storage and transport temperature | |
- Min. Storage and transport temperature | −25 |
- Max. Storage and transport temperature | +70 |
Protection class | IP67 |
Electrical data | |
Design of control element | Opener (NC) |
Number of shutters | 0 |
Number of openers | 2 |
Switching time - Close | - |
Switching time - Open | max. 0,5 ms |
Voltage type | AC, alternating current |
Switch frequency | |
Dielectric strength | > 600 VAC (50 HZ) |
Switching voltage | max. 250 VAC/DC |
Switching current | max. 3 A |
Switching capacity | max. 120 VA / W |
Interference resistance to magnetic fields | |
Outputs | |
Design of control output | Reed contakts |
LED switching conditions display | |
LED switching conditions display (Y/N) | No |
ATEX | |
EX-marking | EX II 3G Ex nC IIC T5 Gc X EX II 3D Ex tc IIIC T90°C Dc X |
Explosion protection categories for gases | ATEX gas ex-protection, Cat. 3 |
Explosion protection Zones for gases | 2 |
Explosion protected category for dusts | ATEX dust ex-protection, Cat. 3 |
Explosion protection Zones for dusts | 22 |
Dimensions | |
Dimensions of the sensor | |
- Width of sensor | 104 |
- Height of sensor | 52 |
- Length of sensor | 47 |
notice | |
The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. | |
When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). | |
Included in delivery | |
Actuators must be ordered separately. | |
Ex-certified screwed cable gland |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by