OOO "ФилФар Технолоджи"

101133843 | BN 310-RZ

  101133843 | BN 310-RZ
Под заказТолько оптом

Цену уточняйте

  • +375 показать номер +375(44)765-55-50
  • +375(29)690-11-55

Заказ только по телефону

  • Контакты
    • Телефон:
      +375(44)765-55-50
      +375(29)690-11-55
    • Контактное лицо:
      Сергей, Владимир
    • Адрес:
      ул. Западная, д.13, каб.519, Минск, Беларусь
    • Email:
      zapros@filfar.by

Техническая спецификация в PDF  

Ordering details

Product type descriptionBN 310-RZ - Ordering suffix
Article number101133843
EAN Code4030661059426
eCl@ss27-27-01-04

Approval

Approval

Global Properties

Permanent lightBN 310
Standards-
Compliance with the Directives (Y/N) Yes
suitable for elevators (Y/N)Yes
MountingEnclosure with mounting slots
Active principleMagnetic drive
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
- Material of the cable mantleH03VV-F
Housing construction formrectangular, flat
Weight65
Recommended actuatorBP 10 N, BP 10 S, 2 x BP 10 N, 2 x BP 10 S, BP 15 N, BP 15 S, 2 x BP 15/2 N, 2 x BP 15/2 S, BP 34 N, BP 34 S, BP 20 N, BP 20 S, BP 31 N, BP 31 S, BP 11 N, BP 11 S, 2 x BP 11 N, 2 x BP 11 S, BP 12 N, BP 12 S, 2 x BP 12 N, 2 x BP 12 S, BP 21 N, BP 21 S, 2 x BP 21 N, 2 x BP 21 S, BE 20 N(S) ST 24VDC, BE 20 N(S) 48VDC
- Lift switchgearBP 10, 2 x BP 10, 2 x BP 15/2, BP 15, 2 x BP 15, BP 34

Mechanical data

Design of electrical connectionCable
Cable length1
Conductors2 x 0,75
AWG-Number18
Mechanical life1.000.000.000 operations
Electrical lifetime1.000.000 … 1.000.000.000 operations
Actuating planesActuation from side
Switch distance5 … 60
BP 10N = 15 mm
BP 10S = 15 mm
2 x BP 10N = 20 mm
2 x BP 10S = 20 mm
BP 15N = 17 mm
BP 15S = 17 mm
2 x BP 15/2N = 22 mm
2 x BP 15/2S = 22 mm
BP 34N = 15 ... 30 mm
BP 34S = 15 ... 30 mm
BP 20N = 3 ... 25 mm
BP 20S = 3 ... 25 mm
BP 31N = 3 ... 25 mm
BP 31S = 3 ... 25 mm
BP 11N = 15 mm
BP 11S = 15 mm
2 x BP 11N = 3 ... 25 mm
2 x BP 11S = 3 ... 25 mm
BP 12N = 20 mm
BP 12S = 20 mm
2 x BP 12N = 10 ... 30 mm
2 x BP 12S = 10 ... 30 mm
BP 21N = 15 ... 45 mm
BP 21S = 15 ... 45 mm
2 x BP 21N = 20 ... 60 mm
2 x BP 21S = 20 ... 60 mm
BE 20N = 20 mm
BE 20S = 20 mm
- noticeActuating distance up to 60 mm depending on actuating magnet and version

The specifications with regard to the switching distances apply to the actuation of the individually mounted devices without ferromagnetic influence. Any change of the
distance, positive either negative, is possible due to ferromagnetic interference. When multiple actuating magnets are used, the mutual
interference must be observed.
Type of actuationMagnet
restistance to shock30 / 11
Resistance to vibration10 … 55 HZ, Amplitude 1 mm
Bounce duration0,3 … 0,6
Latching (Y/N)Yes
Actuating speed18
Switching point accuracy± 0,25 mm

Ambient conditions

Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+75
Protection classIP67 to IEC/EN 60529

Electrical data

Design of control elementbistable contact
Number of snap-in contacts1
Switching time - Close0,3 … 1.5
Switching time - Open0,5
Switch frequency<>
Dielectric strength> 600 (50 )
Switching voltage250
Switching current3 A
Switching capacity120 /

Outputs

Design of control outputReed contakts

LED switching conditions display

LED switching conditions display (Y/N)No

ATEX

Explosion protection categories for gasesNone
Explosion protected category for dustsNone

Dimensions

Dimensions of the sensor
- Width of sensor88
- Height of sensor25
- Length of sensor13

notice

The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.
When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact.
The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.

Included in delivery

Actuators must be ordered separately.

Diagram



Note Diagram
positive break NC contact
active
no active
Normally-open contact
Normally-closed contact

Switch travel diagram



Notes Switch travel diagram
Contact closed
Contact open
Setting range
Break point
Positive opening sequence/- angle
VSadjustable range of NO contact
VÖadjustable range of NC contact
Nafter travel

Ordering suffix

...-2m
...-3m
...-5m Cable length 5 Meter

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Цену уточняйте
Контакты
  • Телефон:
    +375(44)765-55-50
    +375(29)690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, Беларусь
  • Email:
    zapros@filfar.by
Карта