OOO "ФилФар Технолоджи"

101186836 | BN 12-RZ

  101186836 | BN 12-RZ
Под заказТолько оптом

Цену уточняйте

  • +375 показать номер +375(44)765-55-50
  • +375(29)690-11-55

Заказ только по телефону

  • Контакты
    • Телефон:
      +375(44)765-55-50
      +375(29)690-11-55
    • Контактное лицо:
      Сергей, Владимир
    • Адрес:
      ул. Западная, д.13, каб.519, Минск, Беларусь
    • Email:
      zapros@filfar.by

Техническая спецификация в PDF  

Ordering details

Product type descriptionBN 12-RZ
Article number101186836
EAN Code4030661335353
eCl@ss27-27-01-04

Approval

Approval-

Global Properties

Permanent lightBN 12
Standards-
Compliance with the Directives (Y/N) Yes
suitable for elevators (Y/N)Yes
Mountingcentral with threated flange M12 x 1
Active principleMagnetic drive
Materials
- Material of the housingsMetal film
- Material of the cable mantleLiYY
Housing construction formcylinder, thread
Weight50
Recommended actuatorBP 10 N, BP 10 S, 2 x BP 10 N, 2 x BP 10 S, BP 15 N, BP 15 S, 2 x BP 15/2 N, 2 x BP 15/2 S, BP 34 N, BP 34 S, BP 20 N, BP 20 S, BP 31 N, BP 31 S, BP 11 N, BP 11 S, 2 x BP 11 N, 2 x BP 11 S, BP 12 N, BP 12 S, 2 x BP 12 N, 2 x BP 12 S, BP 21 N, BP 21 S, 2 x BP 21 N, 2 x BP 21 S, BE 20 N, BE 20 S
- Lift switchgearBP 10, 2 x BP 10, 2 x BP 15/2, BP 15, 2 x BP 15, BP 34

Mechanical data

Design of electrical connectionCable
Cable length1
Conductors2 x 0,25
AWG-Number23
Mechanical life10.000.000 operations
Electrical lifetime1.000.000 … 10.000.000 operations
Actuating planesActuation from side
Switch distance15 … 60
BP 10N = 15 mm
BP 10S = 15 mm
2 x BP 10N = 20 mm
2 x BP 10S = 20 mm
BP 15N = 17 mm
BP 15S = 17 mm
2 x BP 15/2N = 22 mm
2 x BP 15/2S = 22 mm
BP 34N = 15 ... 30 mm
BP 34S = 15 ... 30 mm
BP 20N = 25 mm
BP 20S = 25 mm
BP 31N = 25 mm
BP 31S = 25 mm
BP 11N = 15mm
BP 11S = 15 mm
2 x BP 11N = 25 mm
2 x BP 11S = 25 mm
BP 12N = 20 mm
BP 12S = 20 mm
2 x BP 12N = 10 ... 30 mm
2 x BP 12S = 10 ... 30 mm
BP 21N = 15 ... 45 mm
BP 21S = 15 ... 45 mm
2 x BP 21N = 20 ... 60 mm
2 x BP 21S = 20 ... 60 mm
BE 20 N = 20 mm
BE 20 S = 20 mm
- noticeActuating distance up to 60 mm depending on actuating magnet and version

The specifications with regard to the switching distances apply to the actuation of the individually mounted devices without ferromagnetic influence. Any change of the
distance, positive either negative, is possible due to ferromagnetic interference. When multiple actuating magnets are used, the mutual
interference must be observed.
Type of actuationMagnet
restistance to shock30 / 11
Resistance to vibration10 … 55 HZ, Amplitude 1 mm
Bounce duration0,15
Latching (Y/N)Yes
bias magnet (Y/N)Yes
Actuating speed18
Switching point accuracy± 0,25 mm

Ambient conditions

Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Protection classIP67 to IEC/EN 60529

Electrical data

Design of control elementbistable contact
Number of snap-in contacts1
Switching time - Close0,35
Switching time - Open30
Switch frequency<>
Dielectric strength580
Switching voltage200
Switching current1 A
Switching capacity30 /

Outputs

Design of control outputReed contakts

LED switching conditions display

LED switching conditions display (Y/N)No

ATEX

Explosion protection categories for gasesNone
Explosion protected category for dustsNone

Dimensions

Dimensions of the sensor
- Length of sensor71
- Diameter of sensor10.7

notice

The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.
When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact.
The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.

Included in delivery

Actuators must be ordered separately.

Diagram



Note Diagram
positive break NC contact
active
no active
Normally-open contact
Normally-closed contact

Switch travel diagram



Notes Switch travel diagram
Contact closed
Contact open
Setting range
Break point
Positive opening sequence/- angle
VSadjustable range of NO contact
VÖadjustable range of NC contact
Nafter travel

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Цену уточняйте
Контакты
  • Телефон:
    +375(44)765-55-50
    +375(29)690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, Беларусь
  • Email:
    zapros@filfar.by
Карта