Ordering details | |
---|---|
Product type description | IFL 20-400-10T - Ordering suffix |
Article number | 101060001 |
EAN Code | 4030661038476 |
eCl@ss | 27-27-01-01 |
Approval | |
Approval | ![]() |
Global Properties | |
Permanent light | IFL - Ø 40 |
Standards | IEC/EN 60947-5-2; DIN VDE 0660-208 |
Compliance with the Directives (Y/N) ![]() | Yes |
Operating resource protection class | Protection class 2 |
Materials | |
- Material of the housings | Plastic |
- Material of the cable mantle | PVC |
- Material of the active surface | Plastic |
- Material of the terminal fixing | Plastic |
Housing construction form | cylinder smooth |
Weight | 210 |
Mechanical data | |
Design of electrical connection | Cable H03VV-F |
Cable length | 2 |
Conductor with strain relief | Yes |
Conductors | 2 x 0,5 |
mechanical installation conditions | not flush |
Switch distance Sn | 20 mm |
Reduction factor 1 met (Y/N) | No |
Protection circuit | inductive interference protection |
Pressure resistant (Y/N) | No |
Ambient conditions | |
Ambient temperature | |
- Min. environmental temperature | −25 |
- Max. environmental temperature | +70 |
Protection type IP | IP67 |
Electrical data | |
Design of control element | Normally open contact (NO) |
Number of wire | 2 |
Voltage type | AC, alternating current |
Supply voltage UB | |
- Min. supply voltage | 15 |
- Max. supply voltage | 250 |
Rated supply frequency | 45 … 65 |
Switch frequency | approx. 10 HZ |
Voltage drop Ud | approx. 4.5 V (250 V / 200 mA) |
Rated impulse withstand voltage Uimp | 4 kV |
Residual current Ir | 1 mA |
Minimum operating current Im | 10 mA |
Operating current Ie | 500 mA |
Outputs | |
Design of control output | Two-wire |
LED switching conditions display | |
LED switching conditions display (Y/N) | Yes |
- yellow LED | |
ATEX | |
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
Dimensions | |
Dimensions of the sensor | |
- Width of sensor | 40 |
- Height of sensor | 40 |
- Length of sensor | 63 |
- Diameter of sensor | 40 mm |
notice | |
Clamp H 40 is included in delivery | |
Diagram | |
![]() Note Diagram ![]() ![]() ![]() ![]() ![]() | |
...-1522 | Operating current Ie: max. 150 mA Voltage drop Ud: approx. 7.5 V (150 mA) |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by