Ordering details | |
|---|---|
| Product type description | IFL 30-384-10/01 - Ordering suffix |
| Article number | 101173580 |
| EAN Code | 4030661302751 |
| eCl@ss | 27-27-01-01 |
Approval | |
| Approval |  CCC |
Global Properties | |
| Permanent light | IFL - 384 |
| Standards | IEC/EN 60947-5-2; DIN VDE 0660-208 |
Compliance with the Directives (Y/N)  | Yes |
| Operating resource protection class | Protection class 2 |
| Materials | |
| - Material of the housings | Plastic |
| Housing construction form | Block |
| Weight | 230 |
Mechanical data | |
| Design of electrical connection | Screw connection |
| Conductor with strain relief | No |
| Cable section | |
| - Min. Cable section | |
| - Max. Cable section | 2 x 1.5 |
| mechanical installation conditions | not flush |
| Switch distance Sn | 30 mm |
| Reduction factor 1 met (Y/N) | No |
| Protection circuit | inductive interference protection |
| Pressure resistant (Y/N) | No |
| • Wiring compartment | |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +70 |
| Protection class | IP67 to IEC/EN 60529 |
Electrical data | |
| Design of control element | Normally open contact (NO) or Opener (NC) |
| Number of wire | 2 |
| Voltage type | AC, alternating current |
| Supply voltage UB | |
| - Min. supply voltage | 15 |
| - Max. supply voltage | 250 |
| Rated supply frequency | 45 … 65 |
| Switch frequency | approx. 10 HZ |
| Voltage drop Ud | approx. 4.5 V (250 V / 200 mA) |
| Rated impulse withstand voltage Uimp | 4 kV |
| Residual current Ir | 1 mA |
| Minimum operating current Im | 10 mA |
| Operating current Ie | 500 mA |
Outputs | |
| Design of control output | Two-wire |
LED switching conditions display | |
| LED switching conditions display (Y/N) | Yes |
| - yellow LED | |
ATEX | |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
Dimensions | |
| Dimensions of the sensor | |
| - Width of sensor | 55 |
| - Height of sensor | 120 |
| - Length of sensor | 40 |
notice | |
| Programmable by repositioning the plug-in jumper at the terminal screws | |
Diagram | |
 Note Diagram  positive break NC contact active no active Normally-open contact Normally-closed contact | |
| ...-1522 | Operating current Ie: max. 150 mA Voltage drop Ud: approx. 7.5 V (150 mA) |
Ordering details
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
