Ordering details | |
|---|---|
| Product type description | AZR31S1-2SEC/24VDC |
| Article number | 101051552 |
| EAN Code | |
| eCl@ss | 27-37-19-01 |
Approval | |
| Approval |  BG |
Classification | |
| Standards | EN ISO 13849-1, IEC 61508, EN 60947-5-1 |
| PL | up e (STOP 0) |
| Control category | up 4 (STOP 0) |
| DC | 99% (STOP 0) |
| CCF | > 65 points |
| PFH value | ≤ 2,0.0 x 10-8/h |
| SIL | up 3 (STOP 0) |
| Mission time | 20 Years |
| - notice | The PFH value is applicable for the combinations listed in the table for contact load (K) (current through enabling paths) and switching cycle number (n-op/y). In case of 365 operating days per year and a 24-hour operation, this results in the specified switching cycle times (t-cycle) for the relay contacts. Diverging applications on request.  |
Global Properties | |
| Permanent light | AZR31S1 |
| Standards | IEC/EN 60204-1, EN 60947-5-1, EN ISO 13849-1, IEC 61508 |
Compliance with the Directives (Y/N)  | Yes |
| Climatic stress | EN 60068-2-78 |
| Mounting | snaps onto standard DIN rail to EN 60715 |
| Terminal designations | IEC/EN 60947-1 |
| Materials | |
| - Material of the housings | Plastic, glass-fibre reinforced thermoplastic |
| - Material of the contacts | AgSn0, self-cleaning, positive action |
| Weight | 400 |
| Start conditions | Automatic |
| Start input (Y/N) | No |
| Feedback circuit (Y/N) | Yes |
| Start-up test (Y/N) | No |
| Automatic reset function (Y/N) | Yes |
| Reset with edge detection (Y/N) | No |
| Pull-in delay | |
| - ON delay with automatic start | approx. 2 seconds after detection of the standstill |
| Drop-out delay | |
| - Drop-out delay in case of power failure | |
| - Drop-out delay in case of emergency stop | <> |
Mechanical data | |
| Connection type | Screw connection |
| Cable section | |
| - Min. Cable section | 0,25 |
| - Max. Cable section | 2.5 |
| Pre-wired cable | rigid or flexible |
| Tightening torque for the terminals | 0,6 |
| Detachable terminals (Y/N) | No |
| Mechanical life | 10.000.000 operations |
| Electrical lifetime | Derating curve available on request |
| restistance to shock | 30 G / 11 ms |
| Resistance to vibration To EN 60068-2-6 | 10…55 HZ, Amplitude 0,35 mm |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +45 |
| Storage and transport temperature | |
| - Min. Storage and transport temperature | −40 |
| - Max. Storage and transport temperature | +85 |
| Protection class | |
| - Protection class-Enclosure | IP40 |
| - Protection class-Terminals | IP20 |
| - Protection class-Clearance | IP54 |
| Air clearances and creepage distances To IEC/EN 60664-1 | |
| - Rated impulse withstand voltage Uimp | 4 kV |
| - Overvoltage category | |
| - Degree of pollution | 2 To IEC/EN 60664-1 |
Electromagnetic compatibility (EMC) | |
| EMC rating | conforming to EMC Directive |
Electrical data | |
| Rated DC voltage for controls | |
| - Max. rated DC voltage for controls | 20.4 |
| - Max. rated DC voltage for controls | 28.8 |
| Rated AC voltage for controls, 50 Hz | |
| - Min. rated AC voltage for controls, 50 Hz | - |
| - Max. rated AC voltage for controls, 50 Hz | - |
| Rated AC voltage for controls, 60 Hz | |
| - Min. rated AC voltage for controls, 60 Hz | - |
| - Max. rated AC voltage for controls, 60 Hz | - |
| Contact resistance | max. 100 mΩ |
| Power consumption | max. 3.2 W |
| Type of actuation | DC |
| Rated operating voltage Ue | 24 VDC −15% / +20%, residual ripple max. 10% |
| Operating current Ie | 0,13 A |
| Electronic protection (Y/N) | No |
| Fuse rating for the operating voltage | 0,315 A slow blow |
Inputs | |
| Monitored inputs | |
| - Short-circuit recognition (Y/N) | Yes |
| - Wire breakage detection (Y/N) | Yes |
| - Earth connection detection (Y/N) | Yes |
| Number of shutters | 0 |
| Number of openers | 0 |
| Cable length | <> |
| Conduction resistance | max. 40 Ω |
Outputs | |
| Stop category | 0 |
| Number of safety contacts | 3 (13-14, 23-24, 33- 34) |
| Number of auxiliary contacts | 1 (41-42) |
| Number of signalling outputs | |
| Switching capacity | |
| - Switching capacity of the safety contacts | max. 250 V, 6 A ohmic (inductive in case of appropriate protective wiring) |
| - Switching capacity of the auxiliary contacts | 41-42: 24 VDC / 2 A |
| Fuse rating | |
| - Protection of the safety contacts | 6.3 A slow blow |
| - Fuse rating for the auxiliary contacts | 2 A slow blow |
| Utilisation category To EN 60947-5-1 | AC-15: 230 V / 6 A DC-13: 24 V / 6 A |
| Number of undelayed semi-conductor outputs with signaling function | 0 |
| Number of undelayed outputs with signaling function (with contact) | 1 |
| Number of delayed semi-conductor outputs with signaling function. | 0 |
| Number of delayed outputs with signalling function (with contact). | 0 |
| Number of secure undelayed semi-conductor outputs with signaling function | 0 |
| Number of secure, undelayed outputs with signaling function, with contact. | 3 |
| Number of secure, delayed semi-conductor outputs with signaling function | 0 |
| Number of secure, delayed outputs with signaling function (with contact). | 0 |
LED switching conditions display | |
| LED switching conditions display (Y/N) | Yes |
| Number of LED´s | 5 |
| LED switching conditions display | |
| - The integrated LEDs indicate the following operating states. | |
| - OUT, green: Authorized operation | |
| - ON, green: Supply voltage UB | |
| - B, red: Input signal channel B | |
| - A, red: Input signal channel A | |
| - ERR, red: Error channel A + B | |
Miscellaneous data | |
| Applications |  safe standstill monitoring |
Dimensions | |
| Dimensions | |
| - Width | 45 mm |
| - Height | 73.2 mm |
| - Depth | 121 mm |
notice | |
| Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit. | |
notice - Wiring example | |
| The sensor-free standstill monitor checks the e.m.f. of the three phase motor. | |
| To secure a guard door | |
| The SRB range guard door monitor checks the position of the guard door. | |
| Monitoring the guard door using a solenoid interlock and a safety switch with separate actuator (A and B). | |
| Release takes place by means of the NO contact (E) only when the run-down movement has been terminated. | |
| After release has taken place, the guard door must be opened. | |
| The wiring diagram is shown with guard doors closed and in de-energised condition. | |
Ordering details
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
