Ordering details | |
---|---|
Product type description | AZM300B-I1-ST-AS-A |
Article number | 103005910 |
EAN Code | |
eCl@ss | 27-27-26-03 |
Approval | |
Approval | ![]() ![]() ![]() ![]() |
Classification | |
Standards | EN ISO 13849-1, IEC 61508 |
PL | e |
Control category | 4 |
PFH | 4.0 x 10−10/ h |
PFD value | 7.0 x 10−5 |
SIL | up 3 |
Mission time | 20 Years |
Global Properties | |
Permanent light | AZM300-AS |
Standards | EN 60947-5-1, ISO 14119, EN ISO 13849-1, IEC 61508, EN 50295 |
Compliance with the Directives (Y/N) ![]() | Yes |
Suitable for safety functions (Y/N) | Yes |
Number of actuating directions | 3 |
Active principle | RFID |
Coding | Individual coding |
Coding levels according to ISO 14119 | High |
Duty cycle | Magnet 100 |
Materials | |
- Material of the housings | Plastic, glass-fibre reinforced thermoplastic |
Housing coating | None |
Weight | 550 |
Guard locking monitored (Y/N) | No |
Actuator monitored (Y/N) | Yes |
Reaction time | ≤ 120 |
Duration of risk | ≤ 200 |
Time to readiness | ≤ 5 s |
Recommended actuator | AZ/AZM300-B1 |
Mechanical data | |
Design of electrical connection | connector plug M12, 4-pole, A-Coding |
Mechanical life | ≥ 1.000.000 operations |
notice - Mechanical life (when used as door stop) | ≥ 50.000 operations for guards ≤ 5 kg; actuating speed ≤ 0,5 m/s |
Switch distance | 2 |
- Ensured switch distance ON | 1 |
- Ensured switch distance OFF | 20 |
restistance to shock | 30 / 11 |
Resistance to vibration | 10 … 150 HZ, Amplitude 0,35 mm |
Emergency unlocking device (Y/N) | No |
Manual release (Y/N) | Yes |
Emergency release (Y/N) | No |
Latching (Y/N) | Yes |
Latching force | 25 / 50 |
Clamping force F | 1150 N |
fixing screws | 2 x M6 |
- tightening torque | 1.8 |
Actuator and interlock misalignment | ≤ 2 |
Ambient conditions | |
Ambient temperature | |
- Min. environmental temperature | 0 |
- Max. environmental temperature | +60 |
Storage and transport temperature | |
- Min. Storage and transport temperature | −10 |
- Max. Storage and transport temperature | +90 |
Protection class | IP66, IP67 to IEC/EN 60529 IP69K to DIN 40050-9 |
Protection rating | II ![]() |
Air clearances and creepage distances To IEC/EN 60664-1 | |
- Rated impulse withstand voltage | 0,8 |
- Rated insulation voltage | 32 |
- Overvoltage category | III |
- Degree of pollution | 3 |
Electrical data | |
Power to unlock | No |
Power to lock | Yes |
Electrical data - AS interface | |
AS-i Supply voltage | 26.5 … 31.6 VDC, Protection against polarity reversal |
AS-i operating current | ≤ 200 |
AS-i Device insulation | internally short-circuit proof |
AS-i Specification | Safety Slave |
- version | V 3.0 |
- Profile | S-7.B.F.E |
AS-i Inputs | |
- Channel 1 | Data bits DI 0/DI 1= dynamic code transmission |
- Channel 2 | Data bits DI 2/DI 3= dynamic code transmission |
AS-i Outputs | |
- DO 0 | Solenoid control |
- DO 1 | not used |
- DO 2 | not used |
- DO 3 | not used |
AS-i Parameter bits | |
- P0 | safety guard closed and can be locked |
- P1 | Solenoid interlock locked |
- P2 | Auxiliary voltage in |
- P3 | device error (FID) |
AS-i input module address | 0 |
- Default on address 0, programmable via the AS-Interface Master or Hand-held programming device | |
notice | Set the parameter outputs to "1111" (0xF) FID: periphery error |
LED switching conditions display | |
LED switching conditions display (Y/N) | Yes |
AS-i LED switching conditions display | |
(1) green/red LED (AS-i duo LED) | Supply voltage / Communication error / slave address = 0 / periphery error detected / Device fault detected / Tamper protection activated |
(2) yellow LED | Device status (Enabling status) |
(3) red LED | device error |
ATEX | |
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
Dimensions | |
Dimensions of the sensor | |
- Width of sensor | 87.4 |
- Height of sensor | 102.6 |
- Length of sensor | 34.4 |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by