OOO "ФилФар Технолоджи"

101209107 | AZM 161 Z ST1-AS R

  101209107 | AZM 161 Z ST1-AS R
Под заказТолько оптом

Оптовые цены уточняйте

  • +375 показать номер +375 (44) 765-55-50
  • +375 (29) 690-11-55

Заказ только по телефону

  • Контакты
    • Телефон:
      +375 (44) 765-55-50
      +375 (29) 690-11-55
    • Контактное лицо:
      Сергей, Владимир
    • Адрес:
      ул. Западная, д.13, каб.519, Минск, 220036, Беларусь
    • Email:
      zapros@filfar.by

Техническая спецификация в PDF  

Ordering details

Product type descriptionAZM 161 Z ST1-AS R
Article number101209107
EAN Code4030661396507
eCl@ss27-27-26-03

Approval

Approval AS-i
TÜV
USA/CAN

Classification

StandardsEN ISO 13849-1, IEC 61508
PLup c
Control category1
PFH1.14 x 10-6 / h
- noticeup to max. 100.000 switching cycles/year
SILup 1
Mission time20 Years
If a fault exclusion for hazardous damage of the 1-channel mechanics is authorized and an adequate protection against tampering is ensured, suitable for use up to:
StandardsEN ISO 13849-1, IEC 61508
PLup d
Control category3
PFH value1.01 x 10-7 / h
- noticeup to max. 100.000 switching cycles/year
SILup 2
Mission time20 Years

Global Properties

Permanent lightAZM 161 AS
StandardsEN 50295, EN 60947-5-1, IEC 61508, EN ISO 13849-1
Compliance with the Directives (Y/N) Yes
Number of actuating directions3
Active principleelectromechanical
Duty cycle EDMagnet 100 %
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
Housing coatingNone
Weight460
Guard locking monitored (Y/N)Yes
Actuator monitored (Y/N)No
Response time<>

Mechanical data

Actuating play in direction of actuation5.5
Design of electrical connectionconnector plug M12, 4-pole
connectorbottom
Mechanical life> 1.000.000 operations
restistance to shock30 g / 11 ms
Resistance to vibration10 HZ … 150 HZ, Amplitude 0,35 mm
Emergency unlocking device (Y/N)No
Manual release (Y/N)Yes
Emergency release (Y/N)No
Latching force30
Clamping force F2000 N
Max. Actuating speed2
Actuating frequencymax. 1000 / h

Ambient conditions

Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+60
Storage and transport temperature
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+85
Relative humidity30 … 95
- non-condensing
Protection classIP67 to IEC/EN 60529
Protection ratingII
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage Uimp0,8 kV
- Rated insulation voltage Ui32 VDC
- Overvoltage categoryIII
- Degree of pollution3

Electrical data

Power to unlockYes
Power to lockNo

Electrical data - AS interface

AS-i Supply voltage26.5 … 31.6 VDC, Protection against polarity reversal
AS-i operating current≤ 250
AS-i Device insulationinternally short-circuit proof
AS-i Specification
- versionV 2.1
- ProfileS-7.B.F.E
- IO-Code0x7
- ID-Code0xB
- ID-Code10xF
- ID-Code20xE
AS-i Inputs
- Channel 1Data bits DI 0/DI 1= dynamic code transmission
- Channel 2Data bits DI 2/DI 3= dynamic code transmission
AS-i Outputs
- DO 0Solenoid control
- DO 1not used
- DO 2not used
- DO 3not used
AS-i Parameter bits
- P0Actuator detected
- P1Solenoid interlock locked
- P2magnet voltage in tolerance range
- P3error message - locking/unlocking of the solenoid interlock blocked
AS-i input module address0
- Default on address 0, programmable via the AS-Interface Master or Hand-held programming device

LED switching conditions display

LED switching conditions display (Y/N)Yes
AS-i LED switching conditions display
(1) yellow LEDChannel 2 / AS-i SaW Bit 2,3
(2) green/red LED (AS-i duo LED)Supply voltage / Communication error / slave address = 0 or periphery error
(3) yellow LEDChannel 1 / AS-i SaW Bit 0,1

ATEX

Explosion protection categories for gasesNone
Explosion protected category for dustsNone

Miscellaneous data

Applications sliding safety guard,
removable guard,
hinged safety guard

Dimensions

Dimensions of the sensor
- Width of sensor130
- Height of sensor90
- Length of sensor30

Pin assignment

1AS-i +
2Aux − (P)
3AS-i −
4Aux + (P)

notice

Interlocks with power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened.
Manual release
• For maintenance, installation, etc.
• For manual release using M5 triangular key, available as accessory

Included in delivery

Actuators must be ordered separately.

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Оптовые цены уточняйте
Контакты
  • Телефон:
    +375 (44) 765-55-50
    +375 (29) 690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, 220036, Беларусь
  • Email:
    zapros@filfar.by
Карта