Ordering details | |
|---|---|
| Product type description | TV14H 256 STL-AS 2S - Ordering suffix |
| Article number | TV14H 256 STR-AS 2S |
| EAN Code | |
| eCl@ss | 27-27-26-01 |
Approval | |
| Approval |    |
Classification | |
| Application: Two position switches, dependent, on one safety guard: | |
| Standards | EN ISO 13849-1, IEC 61508 |
| PL | up e |
| Control category | up 4 |
| PFH | 2 x 10−8 / |
| - notice | up to max. 100000 switching cycles/year |
| SIL | up 3 |
| Mission time | 20 Years |
| Application: Each time one position switch, independent, on two safety guards: | |
| Standards | EN ISO 13849-1, IEC 61508 |
| PL | up c |
| Control category | up 1 |
| PFH value | 1.14 x 10−6 / |
| - notice | up to max. 100000 switching cycles/year |
| SIL | up 1 |
| Mission time | 20 Years |
Global Properties | |
| Permanent light | AS - 256 2S Rollenschwenkhebel 14H |
| Standards | EN 50295, EN 60947-5-1, EN ISO 13849-1, IEC 61508 |
Compliance with the Directives (Y/N)  | Yes |
| Suitable for safety functions (Y/N) | Yes |
| Materials | |
| - Material of the housings | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| - Lever material | Metal film |
| - Roller material | Plastic |
| - Material of the connector | Plastic |
| - Material of the contacts | Silver |
| Housing coating | |
| Housing construction form | Norm construction design |
| Weight | |
Mechanical data | |
| Design of actuating element | Roller lever |
| Design of electrical connection | connector plug M12, 4-pole |
| connector | right |
| Mechanical life | 1.000.000 operations |
| Switching frequency | 5000 |
| actuating torque | 15 |
| restistance to shock | 30 / 11 |
| Resistance to vibration | 10 … 150, Amplitude 0,35 / 5 |
| Positive break torque | 18.5 |
| Actuating speed for vertical actuation | |
| - Max. Actuating speed | 1 |
Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +60 |
| - Min. Storage and transport temperature | −25 |
| - Max. Storage and transport temperature | +85 |
| Relative humidity | 30 … 95 |
| - non-condensing | |
| - non-icing | |
| Protection class | IP67 to IEC/EN 60529 |
| Protection rating | II |
Electrical data | |
| Design of control element | Opener (NC) |
| Switching principle | Creep circuit element |
- positive break NC contact  | |
| Number of auxiliary contacts | 0 |
| Number of safety contacts | 2 |
| Rated impulse withstand voltage | 800 |
| Rated insulation voltage | 32 |
| Thermal test current | 10 A |
| Utilisation category | AC-15: 230 V / 4 A, DC-13: 24 V / 1 A |
| Max. fuse rating | 6 A gG D-fuse |
Electrical data - AS interface | |
| AS-i Supply voltage | 18 … 31.6 VDC, Protection against polarity reversal |
| AS-i operating current | ≤ 50 |
| AS-i Device insulation | internally short-circuit proof |
| AS-i Specification | |
| - version | V 3.0 |
| - Profile | S-0.B.F.F |
| AS-i Inputs | |
| - Channel 1 | Data bits DI 0/DI 1= dynamic code transmission (Z/T 256 AS) |
| - Channel 2 | Data bits DI 2/DI 3= dynamic code transmission (2. switch) |
| AS-i Outputs | DO 0 … DO 3 not used |
| AS-i Parameter bits | P1 … P3 not used |
| - P0 | Channel 2 switched, switching condition 2. switch |
| AS-i input module address | 0 |
| - Default on address 0, programmable via the AS-Interface Master or Hand-held programming device | |
LED switching conditions display | |
| LED switching conditions display (Y/N) | Yes |
| AS-i LED switching conditions display | |
| (1) yellow LED | Channel 1 / AS-i SaW Bit 0,1 |
| (2) green/red LED (AS-i duo LED) | Supply voltage / Communication error / slave address = 0 |
| (3) yellow LED | Channel 2 / AS-i SaW Bit 2,3 |
ATEX | |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
Dimensions | |
| Dimensions of the sensor | |
| - Width of sensor | 87 |
| - Height of sensor | 101 |
| - Length of sensor | 46 |
Pin assignment | |
| Connector | |
| 1 | AS interface + |
| 2 | None |
| 3 | AS interface − |
| 4 | None |
| connector socket 2. switch | |
Switch travel diagram | |
 Notes Switch travel diagram  Contact closed Contact open Setting range Break point Positive opening sequence/- angleVSadjustable range of NO contact VÖadjustable range of NC contact Nafter travel | |
| ...-FKL | Connection for flat cable, left |
| ...-Z | Actuator head gasket |
| ...-RMS | Available with metal roller |
Ordering details
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
