OOO "ФилФар Технолоджи"

111725 | CET3-AR-CRA-AH-50F-SH-C2312-111725

  111725 | CET3-AR-CRA-AH-50F-SH-C2312-111725
Под заказТолько оптом

Цену уточняйте

  • +375 показать номер +375(44)765-55-50
  • +375(29)690-11-55

Заказ только по телефону

  • Контакты
    • Телефон:
      +375(44)765-55-50
      +375(29)690-11-55
    • Контактное лицо:
      Сергей, Владимир
    • Адрес:
      ул. Западная, д.13, каб.519, Минск, Беларусь
    • Email:
      zapros@filfar.by

Техническая спецификация в PDF  

Mechanical values and environment

Housing material
SlideStainless steel
Safety switch housingDie-cast aluminum
Weight
Net 1 kg
Ambient temperature
At UB = 24V DC -20 ... 55 °C
Degree of protectionIP65/IP67 Screwed tight plug connector/mating component
Resilience to vibrationIn acc. with EN IEC 60947-5-2
Mechanical life 1 x 106
Installation positionAny Preferably head downward
Degree of freedom
Z±4 mm
Y±5 mm
X±5 mm
Ready delay 10 s
Switching frequencymax.0,5 Hz
Connection1 plug connector M23, 19-pin, RC18
Approach speed 20 m/min
Guard locking principleClosed-circuit current principle
Locking force Fmax 6500 N
Locking force FZh 5000 N  FZH = FMAX/1.3

Electrical connection ratings

Operating voltage DC
UB 24 V DC  -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%,="" pelv="">
LED 24 V DC  -15% ... 10%
Current consumption
IB 80 mA
ICM 480 mA
Utilization category according to EN 60947-5-2
DC-1324V 200mA Caution: outputs must be protected with a free-wheeling diode in case of inductive loads
Solenoid operating voltage DC
UCM 24 V DC  -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%,="" pelv="">
Fusing
External (operating voltage UB) 0,25 ... 2 A
External (solenoid operating voltage UCM) 0,5 ... 8 A
Power consumption
Solenoidmax.12 W
EMC protection requirementsIn acc. with EN IEC 60947-5-3
Solenoid duty cycle 100 %
Degree of contamination (external, according to EN 60947-1)3
Connecting cable30V DC, 2A For UL requirement UL category code (CYJV2/CYJV8) or (CYJV/CYJV7)
Safety class
EN IEC 61140III
Switching load
According to UL24V DC, class 2 For alternatives see operating instructions
Safety outputs OA/OB
Type of output2 semiconductor outputs, p-switching, short circuit-proof
Switching current
Per safety output OA / OB 1 ... 200 mA
Output voltage
High U(OA) / U(OB) UB-1,5V ... UB V DC
Low U(OA) / U(OB) 0 ... 1 V DC
Off-state current Irmax.0,25 mA
Risk time according to EN 60947-5-3
Single devicemax.400 ms
Delay per device 5 ms
Switch-on time 400 ms
Discrepancy time
Both safety outputsmax.10 ms
Monitoring output OUT
Type of outputp-switching, short circuit-proof
Switching current
OUT 1 ... 50 mA
Output voltage
OUT 0,8xUB ... UB V DC
Switching delay from state changemax.400 ms
Monitoring output OUT D
Type of outputp-switching, short circuit-proof
Switching current
OUT D 1 ... 50 mA
Output voltage
OUT D 0,8xUB ... UB V DC
Switching delay from state changemax.700 ms
Teach-in input
Input voltage
High 15 ... 27,6 V DC
Low 0 ... 1 V DC

Operating distance

Repeat accuracy R
According to EN 60947-5-2 10 %

Miscellaneous

C number
C2312Extended escape release
For the approval according to UL the following appliesOperation only with UL class 2 power supply, or equivalent measures see operating instructions

Reliability values acc. to EN ISO 13849-1

Monitoring of guard locking and the safety guard position
Category
Head upward 3
Head downward or horizontal 4
Performance LevelPL e
PFHD
Head upward4.29 x 10-8
Head downward or horizontal3.1 x 10-9
Control of the guard locking
CategoryDepending on external control of guard locking
Performance LevelDepending on external control of guard locking
PFHDDepending on external control of guard locking

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Цену уточняйте
Контакты
  • Телефон:
    +375(44)765-55-50
    +375(29)690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, Беларусь
  • Email:
    zapros@filfar.by
Карта