098225 | CES-AR-AES-12
Описание
Информация для заказа
Mechanical values and environment | |
|---|---|
| Dimensions | 114 x 99 x 45 |
| Housing material | Plastic PA6.6 |
| Weight | |
| Net | 0,25 kg |
| Ambient temperature | |
| At UB = DC 24 V | -20 ... 55 °C |
| Atmospheric humidity | |
| Not condensing | max.80 % rH |
| Degree of protection | IP20 |
| Resilience to vibration | In acc. with EN 60947-5-2 |
| Mounting method | Mounting rail 35 mm according to EN 60715 |
| Ready delay | max.8 s After the operating voltage is switched on, the relay outputs are switched off and the monitoring outputs are set LOW during the ready delay. For the visual indication of the delay, the green STATE LED flashes at a frequency of approx. 15 Hz. |
| Connection | Plug-in screw terminals coded |
| Number of LED displays | 3 |
| O1 ... O12 | |
| Number of monitoring outputs | 12 |
| Start button S | |
| Manual start operating mode | |
| Duration of operation of start button | min.250 ms |
| Response delay start button | 300 ... 600 ms |
| 13/14, 23/24, 33/34, 43/44 | |
| Number of safety contacts | 4 Relays with internally monitored contacts |
| Mechanical life | |
| Relay | 10 x 106 |
| Switching frequency | 1 Hz If the current load is > 100 mA, a switching frequency of 0.1 Hz should not be exceeded as this will affect the mechanical life of the relay contacts. |
Electrical connection ratings | |
| Operating voltage DC | |
| UB | 24 -10% ... 10% V DC Regulated, residual ripple < 5="" %=""> |
| Current consumption | |
| IB (with relay energized) | 1200 mA Taking into account the load currents at the monitoring outputs (20 mA each) |
| Fusing | |
| External (operating voltage UB) | 2,5 ... 8 A |
| Rated insulation voltage Ui | 250 V |
| Rated impulse withstand voltage Uimp | 4 kV |
| EMC protection requirements | In acc. with EN 60947-5-3 |
| Degree of contamination (external, according to EN 60947-1) | 2 |
| Connection cross-section | 0,14 ... 2,5 mm? |
| Switching delay from state change | max.480 ms Corresponds to the risk time according to EN 60947-5-3. This is the maximum switch-Или отправьте нам запрос наtputs following removal of the actuator. |
| STATE | |
| LED indicator | |
| STATE | Green LED: Status of the device |
| OUT | |
| LED indicator | |
| OUT | Yellow LED: State of the AR chain |
| DIA | |
| LED indicator | |
| DIA | Red LED: Fault display |
| O1 ... O12 | |
| Type of output | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| High | UB - 20% ... UB V DC |
| LOW | 0 ... 1 V DC |
| Output current | max.20 mA |
| DIA | |
| Type of output | Semiconductor output, p-switching, short circuit-proof |
Mechanical values and environment- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |