105139 | CES-AZ-UES-01B
Описание
Информация для заказа
Mechanical values and environment | |
|---|---|
| Housing material | Plastic PA6.6 |
| Weight | |
| Net | 0,2 kg |
| Ambient temperature | |
| At UB = 24V DC | -20 ... 55 °C |
| Atmospheric humidity | |
| Not condensing | max.80 % rH |
| Degree of protection | IP20 |
| Mounting method | Mounting rail 35mm according to DIN EN 60715 TH35 |
| Mounting distance | |
| Sideways toward the neighboring device | min.10 mm If several evaluation units are mounted side by side in a control cabinet without air circulation (e.g. fan), a minimum distance of 10 mm must be maintained between the evaluation units. The distance enables heat from the evaluation unit to dissipate. |
| Number of read heads | 1 read head can be connected |
| Ready delay | 10 ... 12 s After the operating voltage is switched on, the relay outputs are switched off and the door monitoring output is set LOW during the ready delay. For the visual indication of the delay, the green STATE LED flashes at a frequency of approx. 15 Hz. |
| Reaction time | |
| After change in the actuation status | max.210 ms Corresponds to the risk time according to EN 60947-5-3. This is the maximum switch-Или отправьте нам запрос наtputs following removal of the actuator. In case of EMC interference in excess of the requirements in accordance with EN 60947-5-3, the switch-off delay can increase to max. 250 ms. After a brief actuation < 0.25="" s,="" the="" switch-on="" delay="" can="" increase="" to="" max.="" 3="" s="" if="" this="" is="" followed="" immediately="" by="" further=""> |
| Duration of operation start button (for Manual start operating mode) | min.250 ms |
| Response delay start button (for Manual start operating mode) | 200 ... 300 ms |
| Switching frequency | max.0,25 Hz In case of monitoring with feedback loop, the actuators must remain outside the operating distance, e.g. with a door open, until the feedback circuit is closed |
| Dwell time | min.3 s The dwell time is the time that the actuator must be inside or outside the operating distance. |
| Connection | Plug-in connection terminals, coded Terminals not included |
| Safety contacts 13/14, 23/24 | |
| Number of safety contacts | 2 Relays with internally monitored contacts |
| Mechanical life | |
| Operating cycles (relay) | 10 x 106 |
Electrical connection ratings | |
| Operating voltage DC | |
| UB | 21 ... 24 ... 27 V DC |
| Current consumption | |
| (with relay energized) | 150 mA Without taking into account the load currents on the monitoring outputs |
| Fusing | |
| External (operating voltage UB) | 0,4 ... 8 A |
| EMC protection requirements | In acc. with EN 60947-5-3 |
| Degree of contamination (external, according to EN 60947-1) | 2 |
| Connection cross-section | |
| (plug-in screw- / springterminals) | 0,25 ... 2,5 mm? |
| Current via feedback loop | 5 ... 8 ... 10 mA |
| permissible resistance in feedback loop | max.600 ? |
| Safety contacts 13/14, 23/24 | |
| Type of output | Relay contacts, floating |
| Switching current | |
| At switching voltage AC/DC 21 ... 60 V | 1 ... 300 mA |
| At switching voltage AC/DC 5 ... 30 V | 10 ... 6000 mA |
| At switching voltage AC 5 ... 230 V | 10 ... 2000 mA |
| Fusing | |
| External (safety circuit) according to EN 60269-1 | 6 AgG or 6 A circuit breaker (characteristic B or C) |
Mechanical values and environment- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |