121290 | MSC-CE-AC-FI8FO2-121290
Описание
Информация для заказа
Mechanical values and environment | |
|---|---|
| Dimensions | 108 x 22.5 x 114.5 Including screw terminals |
| Material | |
| Housing | Polyamide |
| Ambient temperature | -10 ... +55 °C |
| Atmospheric humidity | 10 ... 95 % rH |
| Degree of protection | IP20 |
| Mounting method | Mounting rail 35mm Acc. to EN 60715 |
| Connection | Plug-in screw terminal Terminals not included |
| Cable length | max.100 m With length above 50m use cross-section >1mm2. |
| Pulse output 1...4 | |
| Number of outputs | 4 |
| Status (can be programmed via software) | |
| Number of monitoring outputs | 2 |
| Safety input 1...8 | |
| Number of inputs | 8 |
| External relay monitoring (EDM), automatic, manual operation | |
| Number of inputs | 2 |
| For node selection | |
| Number of inputs | 2 |
| Safety outputs OSSD1, OSSD2 | |
| Number of safety outputs | 2 |
Electrical connection ratings | |
| Operating voltage DC | |
| UB | 24 V DC -20% ... +20% PELV Acc. to EN 60204-1 |
| Overvoltage category according to IEC EN 60664-1 | II |
| Degree of contamination according to EN 60664-1 | 2 |
| Connection cross-section | 0,5 ... 2,5 mm? |
| Delay time | 0,0106 ... 0,0546 s Depending on the number of slave modules, operators and OSSD outputs. (See operating instructions and calculated values in the software "Euchner Safety Designer") |
| Power consumption | max.3 W |
| Pulse output 1...4 | |
| Test pulses | 0,2 ms |
| Type of output | Semiconductor outputs, p-switching Acc. to EN 61131-2 |
| Status (can be programmed via software) | |
| Type of output | Semiconductor outputs, p-switching |
| Output current | max.100 mA |
| Safety input 1...8 | |
| Type of input | Semiconductor inputs, p-switching Acc. to EN 61131-2 |
| External relay monitoring (EDM), automatic, manual operation | |
| Type of input | Semiconductor inputs, p-switching Acc. to EN 61131-2 |
| For node selection | |
| Type of input | Semiconductor inputs, p-switching "Typ2" acc. to EN 61131-2 |
| Safety outputs OSSD1, OSSD2 | |
| Test pulses | 0,1 ms |
| Inductive load | max.30 mH |
| Capacitive load | max.0,82 ?F |
| Type of output | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| HIGH | UB-0,75 ... UB V DC |
| LOW | 0 ... 2 V DC |
| Output current | |
| Max. load at 24VDC | - ... 400 mA |
Reliability values acc. to EN ISO 13849-1 | |
| ESPE type | 4 |
Mechanical values and environment- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |