085639 | SFM-A02
Описание
Информация для заказа
Mechanical values and environment | |
|---|---|
| Housing material | Polyamide PA6.6 |
| Weight | |
| Net | 0,45 kg |
| Ambient temperature | -20 ... 60 °C |
| Degree of protection | IP20 |
| Mounting method | Mounting rail 35mm according to DIN EN 6715 TH35 |
| Connection | Connection terminals |
| Safety contacts 1.14, 1.24, 2.14, 2.24 | |
| Number of safety contacts | 2 |
| Auxiliary contact terminals: L/+/1.Y1, L/+/2.Y1 | |
| Number of monitoring contacts | 2 |
| Terminals for the start buttons: 1.Y2, 2.Y2 | |
| Number of inputs | 2 |
Electrical connection ratings | |
| ASi voltage | 18,5 ... 31,6 V |
| ASi operating current | max.45 mA |
| Operating voltage DC | |
| 24 | -15 ... +15 V DC A power supply unit with electrical isolation in accordance with IEC 60742, PELV, must be used to power the safety monitor and all AS-Interface components. |
| Rated operating current Ie | 200 mA |
| Rated thermal current Ith | |
| Per output circuit | 3 A |
| Fusing | |
| External contact fuses (safety circuit) according to IEC 60269-1 | 4A medium slow-blow |
| Residual ripple | max.15 % |
| Overvoltage category according to IEC EN 60664-1 | 3 |
| Connection cross-section | |
| For wire | 1x(0.5...4.0)mm2, 2x(0.5...2.5)mm2 |
| Flexible wire with cable end sleeve | 1x(0.5...2.5)mm2, 2x(0.5...1.5)mm2 |
| 2x AWG 20 to 14 | |
| Current via feedback loop | |
| at 24 V DC | Optocoupler input active high input current 10 mA |
| Response delay | max.40 ms |
| Switch-on delay | max.10 s |
| Max. contact load | |
| DC-13 | 1A 24V |
| AC-15 | 3A 230V |
| ASi slave type | |
| EA code: 7 | |
| ID code: F | |
| Safety contacts 1.14, 1.24, 2.14, 2.24 | |
| Type of output | |
| 2 NO contacts per safety output | Relay contacts, floating, positively driven Positively driven relays according to EN50205 |
| Auxiliary contact terminals: L/+/1.Y1, L/+/2.Y1 | |
| Type of output | Semiconductor output, 200 mA, short-circuit and reverse polarity protection |
| Terminals for the start buttons: 1.Y2, 2.Y2 | |
| Type of input | |
| at 24 V DC | Optocoupler input active high for start buttons, input current approx. 10 mA |
Interface, bus | |
| Data interface | Connection socket for configuration |
Miscellaneous | |
| in compliance with | EN ISO 13849Или отправьте нам запрос наC EN 60204-1, EN 50295 |
| Function scope | Base |
Reliability values acc. to EN ISO 13849-1 | |
| Performance Level | PL e |
| Category | 4 |
| PFHD | 9.1 x 10-9 |
| SIL CL | 3< |
Mechanical values and environment- Цена: Цену уточняйте
Информация для покупателя
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Дата регистрации в Торговом реестре/Реестре бытовых услуг: 18.03.2015
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
| День | Время работы |
|---|---|
| Понедельник | 09:00-17:00 |
| Вторник | 09:00-17:00 |
| Среда | 09:00-17:00 |
| Четверг | 09:00-17:00 |
| Пятница | 09:00-17:00 |
| Суббота | Выходной |
| Воскресенье | Выходной |