HART Loop Converter KFD2-HLC-Ex1.D
General specifications | |
---|---|
Signal type | Analog input |
Supply | |
Connection | Power Rail or terminals 23+, 24- |
Rated voltage | 19 ... 30 V DC |
Rated current | approx. 120 mA at 24 V DC |
Power dissipation | 2.3 W |
Power consumption | 2.9 W |
HART signal channels (intrinsically safe) | |
Conformity | HART field device input (revision 5 to 7) |
Interface | |
Programming interface | programming socket |
Input | |
Connection side | field side |
Connection | terminals 1, 2, 3, 4, 5, 6 |
Open circuit voltage/short-circuit current | typ. 24 V / 28 mA |
Input resistance | 250 ? , 5% (terminals 2, 3 and with jumper on 5, 6) |
Available voltage | ? 15.5 V at 20 mA, short-circuit protected |
Output | |
Connection side | control side |
Connection | output I: terminals 7, 8, 9 , output Или отправьте нам запрос наoutput III: terminals 19, 20, 21 |
Output signal | analog |
Current range | 4 ... 20 mA , (source or sink mode) |
Load | max. 650 ? , source mode |
Voltage range | 5 ... 30 V , sink mode from external supply |
Fault signal | downscale I ? 2 mA, upscale I ? 21.5 mA (acc. NAMUR NE43) or hold measurement value |
Other outputs | HART communicator on terminals 22, 24 |
Collective error message | Power Rail and LED red |
Transfer characteristics | |
Output I, II, III | |
Galvanic isolation | |
Output I/II/III/power supply | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
Indicators/settings | |
Display elements | LEDs , display |
Control elements | Control panel |
Configuration | via operating buttons via PACTware |
Labeling | space for labeling at the front |
Directive conformity | |
Electromagnetic compatibility | |
Low voltage | |
Conformity | |
Electromagnetic compatibility | NE 21:2006 |
Degree of protection | IEC 60529:2001 |
Ambient conditions | |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications | |
Degree of protection | IP20 |
Connection | screw terminals |
Mass | 300 g |
Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) , housing type C3 |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas | |
EU-Type Examination Certificate | BASEEFA 07 ATEX 0174 |
Supply | |
Equipment | <td align="center" class="</tr>
- Цена: Цену уточняйте
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
День | Время работы |
---|---|
Понедельник | 09:00-17:00 |
Вторник | 09:00-17:00 |
Среда | 09:00-17:00 |
Четверг | 09:00-17:00 |
Пятница | 09:00-17:00 |
Суббота | Выходной |
Воскресенье | Выходной |