OOO "ФилФар Технолоджи"

159086 | MGBS-P-L1-AR-U-R-AEE-SH-159086

  159086 | MGBS-P-L1-AR-U-R-AEE-SH-159086
Под заказТолько оптом

Оптовые цены уточняйте

  • +375 показать номер +375 (44) 765-55-50
  • +375 (29) 690-11-55

Заказ только по телефону

  • Контакты
    • Телефон:
      +375 (44) 765-55-50
      +375 (29) 690-11-55
    • Контактное лицо:
      Сергей, Владимир
    • Адрес:
      ул. Западная, д.13, каб.519, Минск, 220036, Беларусь
    • Email:
      zapros@filfar.by

Техническая спецификация в PDF  

Mechanical values and environment

Housing material
Switch bracketDie-cast zinc
Safety switch housingFiber glass reinforced thermoplastic
Weight
Net 1,5 kg
Ambient temperature
At UB = 24V DC -20 ... +55 °C
Degree of protectionIP65 Screwed tight plug connector/mating component
Resilience to vibrationIn acc. with EN IEC 60947-5-3
Mechanical life 1 x 106
Installation positionAny
Ready delay 8 s
Switching frequencymax.0,5 Hz
Connection1 plug connector M23, 19-pin, RC18
Approach speed 20 m/min
Guard locking principleClosed-circuit current principle
Locking force Fmax 3900 N
Locking force FZh 3000 N  Fzh = Fmax/1.3 Depending on the actuator used
Retention force 20 N
Extraction force 20 N
Actuating force 10 N
Overtravel 5 mm

Electrical connection ratings

Test-pulse intervalmin.140 ms
Test pulsesmax.1,0 ms  Applies for a load with C ? 30nF and R ? 20kOhm
Operating voltage DC
UUB 24 V DC  -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%,="" pelv="">
Current consumption
IUB 40 mA
IIMP 400 mA
Utilization category according to EN 60947-5-2
DC-1324V 150mA Caution: outputs must be protected with a free-wheeling diode in case of inductive loads
Solenoid operating voltage DC
UIMP 24 V DC  -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%,="" pelv="">
Fusing
External (operating voltage UB) 0,25 ... 2 A
External (solenoid operating voltage IMP) 0,5 ... 8 A
Rated insulation voltage Uimax.50 V
Rated impulse withstand voltage Uimpmax.0,5 kV
Power consumption 6 W
EMC protection requirementsIn acc. with EN IEC 60947-5-3
Solenoid duty cycle 100 %
Degree of contamination (external, according to EN 60947-1)3
Safety class
EN IEC 61140III
Risk time according to EN 60947-5-3
Delay per device 5 ms
Single devicemax.260 ms
Switching load
According to UL24V DC, class 2 Alternatively see operating instructions
Safety outputs FO1A / FO1B
Type of output2 semiconductor outputs, p-switching, short circuit-proof
Switching current
Per safety output FO1A / FO1B 1 ... 150 mA
Output voltage
High U(FO1A) / U(FO1B) UB-1,5 ... UB V DC
Low U(FO1A) / U(FO1B) 0 ... 1 V DC
Off-state current Irmax.0,25 mA
Switch-on timemax.400 ms
Discrepancy time
Both safety outputsIn acc. with EN IEC 60947-5-3max.10 ms
Monitoring output OD
Type of outputp-switching, short circuit-proof
Switching current 1 ... 50 mA
Output voltage 0,8xUB ... UB V DC
Monitoring output OI
Type of outputp-switching, short circuit-proof
Switching current 1 ... 50 mA
Output voltage 0,8xUB ... UB V DC
Controls and indicators
Operating voltage UB V
Operating current 1 ... 50 mA
Power supply
LED 24 V
Current consumption
LED 10 mA
Emergency stop
Operating voltage 5 ... 24 V
Operating current 1 ... 100 mA

Operating distance

Repeat accuracy R
According to EN 60947-5-2 10 %

Controls and indicators

Control/indicator
Position 1
VersionEmergency stop
Switching element1 pos. driven NC
Control/indicator
Position 2
VersionIlluminated push buttons
Switching element1NO
Control/indicator
Position 3
VersionIlluminated push buttons
Switching element1NO

Miscellaneous

Additional feature
Incl. cover set ID. No. 120344
Escape release actuated by pushing
For the approval according to UL the following appliesOperation only with UL class 2 power supply, or equivalent measures see operating instructions

Reliability values acc. to EN ISO 13849-1

Emergency stop
B10D 0,065 x 106

 

По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:

  

8 (029) 555-8-000

  

8 (044) 555-8-000

 

8 (017) 255-8-000

Или отправьте нам запрос на e-mail:  zapros@filfar.by

 

Информация для заказа
  • Цена: Оптовые цены уточняйте
Контакты
  • Телефон:
    +375 (44) 765-55-50
    +375 (29) 690-11-55
  • Контактное лицо:
    Сергей, Владимир
  • Адрес:
    ул. Западная, д.13, каб.519, Минск, 220036, Беларусь
  • Email:
    zapros@filfar.by
Карта